Do you want to bring wifi and bluetooth connectivity to your Hackintosh?
And as always in all of my videos - the easiest and fastest way?
Some solution which gives to your Hackintosh wifi and bluetooth without any tweaking and
fiddling, which works simply out of the box?
And for cheap?
Well, that’s exactly what I will show you in this video.
Hi, I’m Teresa from morgonaut.cloud and I help people with Apple computers, Hackintosh
builds, Linux servers, simply with computers.
If you are new here, then please click that subscribe button and hit the bell next to
it, so you won’t miss any of my future videos.
This video is for all Hackintosh users and does not matter if you bought motherboard
with wifi & bt or without it.
BTW if you built a Hackintosh based on motherboard WITH integrated wifi and bluetooth you for
sure noticed, it’s simply not working :) It’s quite obvious, because all of those stock PC
wifi and bluetooth chips are simply incompatible with macOS.
That’s why I never recommend to someone who wants to build a Hackintosh to buy the more
expensive motherboard with wifi and bluetooth integrated onboard, it’s a waste of money.
Buy the same board, but without the wifi.
Some of them have working single section, but not the other one, but most of them will
simply never work.
You would still have to simply remove the wifi/bt chip out of your motherboard completely.
So that’s why lot of people ask me all the time, what I personally recommend to get wifi
and bluetooth perfectly working in Hackintosh under latest macOS Mojave in our case.
On the market there is lot of solutions claiming macOS or Hackintosh compatible, I tested some
of these, but not all they say was true.
So I understand people are confused and don’t want to invest into anything non working.
So, I always recommended original wifi/bt modules from real MacBooks in PCIe adapters.
Unfortunately that’s quite expensive for lot of people.
Finally we found product which is way cheaper and works 100% perfectly and… out of the box
It cost just 40 Pounds in UK or 45 € in Germany.
It’s this little baby.
Really very small with 2 massive antennas and USB 2 header connection.
And takes only single PCIe x1.
BTW Links where you can buy this 100% macOS compatible wifi/bt card for your Hackintosh
you can find now in this video description.
So I will show you now an example on one of my 14-core iMac Pro Killer Hackintosh builds
based on the Gigabyte Z390 Designare motherboard and Intel Core i9-9900k.
BTW This Z390 Designare motherboard is by my opinion the best motherboard for Hackintosh
ever - watch my 14-core iMac Pro killer video series to see more info about it.
Here as a proof you can see my Hackintosh DOES NOT have any bluetooth or wifi connectivity
at this moment.
So all you need to do to make wifi and bluetooth working is just physically install this card
to your system :) So I will show you now how to do it.
Simply as any other PCIe card slide it into the PCIe socket
secure it with the screw on top and just connect the USB connector to your USB 2 header on your motherboard.
Then screw in those 2 antennas.
That’s all, easy like that.
Now just boot the system.
So when I will go now to About This Mac and bluetooth section, bang I now have working BlueTooth.
The same with wifi.
Already connected to my network.
So as you could see, this card works really out of the box, you don’t need to spend
dozens of days searching through internet for some magical kernel extensions to make
it working, it’s simply plug and play, because it’s using native hardware Apple use in
their own computers, so drivers for it are included in macOS Mojave.
Simply buy this card, physically install it to your computer and start your computer.
That’s all.
Everything will be working straight away as it should and your Hackintosh will get wifi
and bluetooth functionality the easiest way.
Links where you can buy this wifi/bt card you can find now in this video description.
Of course your internal USB 2 header must be properly mapped, that means enabled for
use in the system.
So people who are using my initial EFI from my 14-core iMac Pro killer does not have this
port enabled, because in my build it’s used by the Kraken X62 CPU cooler.
But don’t worry, I think about you and I will prepare this USB port mappings for you soon
Simply don’t buy any scammy products, buy only tested and verified products.
And you know already I recommend strictly only components I personally tested and verified,
this one I can absolutely recommend, it simply works 100% as it should and out of the box.
If you would need some help with Apple Mac, Linux, Windows computer, BSD, server
for virtualization, ZFS file server, video editing, fine tuning your workflow or just
consulting, you can always get my personal individual support on my website
link is again in this video description.
So I hope I made your day again little better, if so, please click on the like button bellow.
Click also the share button and share this video with your friends so it can help to
more people.
Don’t forget to subscribe to both of my youtube channels and hit the bell next to
it, so you will get notifications about my new videos.
You can also reach me at my Facebook, Twitter, Reddit or my website.
Morgonaut is always here to help :) And of course don’t forget to watch my other videos.
So, that’s all for today, thank you for watching and see you next time my friends