Messick's, a helping hand to your land.
[music]
Neil from Messik's here, out today with the Land Pride S 820
post auger to go on the front of some compact tractors,
machines are going to have a little less hydraulic flow.
This is a unique piece that we've had a lot of interest in here lately,
coming from guys that are a little disappointed
in the performance of three-point hitch post augers.
Remember, about a year ago or so ago
I did what was one of our most popular videos
of the five worst attachments for a compact tractor.
One of those was a three-point hitch post auger.
This is the much better alternative.
We'll take a walk around here
show you exactly how this fits up to the tractor.
The biggest issue with doing an auger
off the three-point hitch of a tractor
is the three-point hitch's lack of downforce.
They do not push down into the ground
you're relying on the flighting on the screw to actually dig down
into the ground and drill that hole.
A loader, though, can do a much better job of that,
using the hydraulic force of the loader,
pushing that auger down into the ground.
You're able to penetrate much harder ground, much more quickly.
It’s a lot more efficient, a lot easier to use, and a lot safer too.
You'll often see guys doing some really unsafe things
in order to push those augers down into the ground.
In order to mount one of these up to a tractor though,
you just can't snap it on your quick attach and go.
There are a handful of things that you need to have set up on your machine
in order to be able to accept this thing properly.
This right here is a third functioning kit,
so most loaders don't have additional hydraulic outlets
out on the end of them, but a third functioning kit,
which is an additional valve segment back here
that gives you two buttons in order to operate
an additional hydraulic function out on the loader,
becoming more and more popular.
On some tractors, you'll hear some talk,
a kind of the internet speak,
this isn't something you hear in dealerships so much,
of a true third function versus a diverter.
Sometimes you'll see these done
where the valve body is out on the loader itself,
when you push that button,
what you're doing is switching from one loader function
over to that diverter's hydraulic line.
A true third function is a little bit different than that,
it just taps in alongside of the loader valve,
allowing you to operate these functions,
while simultaneously operating the circuit.
Most of the time that doesn't matter,
you can work around the difference between
the true third function the diverter,
but this is one place that you definitely want that true third function.
In order to operate this guy, you're going to want to be able
to open this up and run the hydraulic screw,
while simultaneously letting your loader drop down to the ground
in order to push that thing down drill your hole.
Now loader mounted hydraulic augers are not a new thing at all.
Skid steers have been doing this for a long, long time.
We sell a lot of really powerful, high capacity skid steer augers,
they're going to have much larger motors out here on the end.
They can take advantage of the hydraulic flow that a skid steer has,
but when we get down to a smaller machine like this,
we have much more limited hydraulic flow.
Skid steers tend to be in the high teens on the low end for a small machine,
as much as 40 and 50 for high flow models,
small tractors like this
don't put nearly that much flow out this front remote.
This B Series tractor behind me here
only delivers between about six seven gallons of hydraulic flow
out these third function lines.
If you took that skid steer-oriented auger and put it onto this machine,
it would run it, but this flighting would turn extremely slow
not be super usable.
You'll notice here when we run this guy,
even this one with six gallons a minute, it's very functional,
this doesn't run particularly fast.
The more hydraulic flow you're going to have on that tractor,
the quicker this is going to turn,
the faster you're going to be able to drill those holes.
Excellent for anybody looking to deck posts, put in some fences,
if you're in any kind of, say, production environment,
where you really need to move quickly,
probably going to want a little bit more hydraulic flow from your tractor.
Another nice thing that they do on this as well
is give you multiple mounting points,
you'll see right now we have this one set up in the middle.
If you go over here to the side, there's a whole other mounting point
that allows you to all set the auger to the side.
Again, if you go back to those post holes,
you're driving down the fence line,
having it over here on the edge might be a little bit easier
to give you a different sightline,
help you be a little bit closer to maybe a neighboring fence
something as you go.
I have to give a special shout out
to the gentleman who's buying this tractor
who happened to be watching my YouTube videos and was kind enough
to allow us to show this to you today.
This is not an everyday setup for us around here.
We only sell a couple of these a year
he was kind enough to let us come out here,
actually put this into the dirt for the very first time
for you to be able to watch.
Special shout out for letting us do this because
the first time into the dirt is a special thing.
[engine starts]
We're going to start the machine up here,
we're going to take our revs off in order to get as much hydraulic flow
as we can to spin this thing.
You'll see here, once I have it up and running
when I take my two buttons here,
I could spin my auger around.
When you do this, you're going to want to generally
drill your holes straight, so we're going to lift the loader up
roll the thing forward.
There's a little indicator on here
that helps you see vertical on this as you go up and down,
I can see that this is just about straight.
We'll go ahead and run this,
take it down to the ground. I'm going to float my loader
just let the weight pull itself down into the ground.
It will slowly, slowly pull itself down.
Now you see that I'm starting to go slow or almost stop,
so if I pull it out of float, actually use the loader
in order to let the hydraulics help assist this thing down into the ground,
I could push down and move more quickly,
with more power than I could otherwise.
One of the tricks of running these things
is getting that hole to actually clean out,
when you lift the auger out, to not have any dirt in it.
When I get here to about the top, I'm going to stop pushing down,
continue to let the auger run here for a little bit
to clean the dirt out of the hole pull as much up as possible.
Now, once that's up, I'm going to lift the auger up,
bring all the dirt up, out of the hole.
You see how there it'll sit on the flighting?
That's how, hopefully, you get a fairly clean hole.
Now, we're going to back up,
kick this thing out, just give it a little shake there
to shake the dirt off the auger.
That will be the first of our post holes.
You see running that there, the flighting on this doesn't spin super fast,
that is that speed even with a lower flow motor.
Keep in mind, if you're setting your tractor up to do this,
you definitely want to get one of these
that you have the proper hydraulic flow motor.
Even if you find a used skid steer model out there,
not necessarily a great idea to try pin it on to a tractor like this
have a go at it.
Generally, if you have enough hydraulic pressure,
you should conceivably be able to get enough torque on this thing
in order to spin it, but the flighting is going to go superslow,
you're not going to be really productive or efficient with it at all.
Having run this before too, this is a really small auger.
I've run a tractor mount version of this with a bigger auger before
did start to feel those torque limits getting to larger sizes.
This is something that you really want to keep in mind for post holes
that kind of thing, but not something that I want to be going out
running 12-inch and 18-inch augers regularly
because you'll find these hydraulic limitations fairly quickly.
If you could use an attachment like this
if you have parts with service needs for equipment you already have,
give us a call at Messick's, we're available at 800-222-3373.
We're online at messicks.com.
[music]
It seems like we can shoot a lot of different things.
We can go out and see if we can drill a hole, cut our grass,
then till our garden, all at the same time.
It'd be really productive and get a lot of videos done here at one time
[music]