hi everyone Aaron here for ZolloTech and many of you if you've been following my
videos for any amount of time know that I'm not a huge fan of using cases on my
phones however for many years I used skins and so I thought we'd take a look
at some and skin it was nice enough to send along these skins and sponsor the
video so we could take a look at them now this particular skin is the carbon
fiber skin and what's unique about skin is they've been around before most skin
companies or even a thing they've been around since 2003 and they even allow
you to create your own the skins and they have a lot of brand deals with
every sports major sports company or also colleges and DC Comics Marvel
Disney and some others as well so back in the day when the iPhone 4 or even the
3 3GS 4 or 4s were out I always use the skin on my phone and so I'd use one like
this and so this is a carbon fiber skin and then we have a marbled skin that's
on a pixel 3 XL and of course they make it for a ton of different devices and in
all sorts of colors so this is the marbled skin you'll see it protects the
back and personally I'm more concerned about protecting the back of the phone
like this because I pick it up and send it down and usually what happens is it
where is quite a bit right here so a skin can take that damage and then
doesn't add a whole lot of bulk to the phone but instead you get a better
experience using the phone and also a little bit of protection as far as
scrapes and in those sorts of things now you can create your own skins but one of
the skins that we're going to check out has to do with the Nintendo switch but
before we do that they do also make cases and this is just a marble case
that they sent along it fits the iPhone X and XS as you can see here so I'll
slide the ten in place and you'll see it fits nicely around the camera no
problems there the buttons feel pretty good they're not too hard to push they
still have that nice tactile feel to them the volume buttons too they don't
feel mushy you can feel the actual click underneath them which is nice and they
do protect the bottom as well so you've got the same protection on the bottom
that you would get with most cases but then you can customize the case or you
can change it to whatever you'd like this is just the black
one so let me set this aside and we'll take a look at this this should be kind
of interesting so this is for the Nintendo switch and it's a carbon fiber
skin and I do have a switch right here it is missing the kickstand since this
is one of the release day switches these were pretty cheap and it's probably
around but it falls off pretty easily and then I have a terrible screen
protector on it that didn't fit right so we're going to put this on instead and
see what it looks like so I'll put this on and then we'll come back and see what
it looks like so I've begun wrapping everything you can see this is
completely wrapped as is the controller and the switch itself now like I said I
am missing this piece I'm sure I'll find it around here somewhere but it falls
off pretty easily on the early switch models so let me set this aside and I'll
show you how we wrap this one and you just have to be really careful and line
it up as good as you can and you can actually stretch this a little bit so
you see I want it to line up perfectly around the buttons but to get it to line
up here you actually have to pull on it a little bit so we're good here let's
move around to the edge and there we go here and then let's just make sure this
is straight it looks good and then we just push it down all over the place and
it's wrapped on to this so it's pretty simple to do if you take your time and
then that's carbon fiber wrapped now there's a lot more to go so I'll wrap
some of this stuff and we'll take a look at it afterwards
so I've got everything wrapped with this carbon fiber wrap and I wanted to show
you a little bit more close-up you'll see here along the top everything's
lined up pretty perfectly no issues there same thing is true with the bottom
here you'll see everything it looks pretty good and again with these
controllers this is pretty perfect here and we even have these carbon fiber
wraps so if you want to use this little thing here it looks in matches pretty
nicely and then again slide it off and everything matches really well you've
also got it here on the stand or the charge base and even on the back the
sides and one thing that impressed me when I was putting this on you'll see
how well this is cut right here all these holes are perfect and then along
the top it just lined up so it wasn't terribly difficult to put on
I have probably had the hardest time with these oddly enough and you just
line up the middle fold them over and they look pretty good so they all fit
really well and then if you want this carbon fiber look for your switch you
can have it so it looks good I think if you want to protect your switch or any
video game machine or phone or whatever this is a great option and then this
just sits in here and everything matches and now of course if you don't like it
you could remove it and change it to something else your favorite team or or
whatever they have that available and then also for this as well it's fully
wrapped all the way around so that's it for skin it I'd love to hear what you
have to say about them in the comments below I think I like this one the best
on the back of this phone just gives it a little bit more unique look protects
the back from scratching and it looks good with these sides so I think it
looks pretty good overall but let me know what you think in the comments
below of course I'll link all the products in the description and this
wallpaper as well if you'd like to get your hands on it if you haven't
subscribed already please subscribe and like as always thanks for watching this
is Aaron I'll see you next time