Hey, what's up. David Glenn for davidglennrecording.com, theproaudiofiles.com, and the new themixacademy.com.
Today, we are going to talk about creating some space for the vocal in a mix, push down
some music a little bit, and how to open up the music once the vocal is no longer singing
and no longer in the mix.
Very simply, we're going to use WavesFactory TrackSpacer to accomplish this, and a simple
send. So we're going to load TrackSpacer, and I'm going to show you how to set it up.
Then we're going to bring this in and give it a buss. We're going to pick buss 30. Then
I'm going to go to my music. All vocals here, but you could go to your lead vocal if you
wanted to. We'll just do it from the lead.
We're going to send buss 30. Come over here to the right, and I'm going to throw that
up. Now that lead vocal is sidechained and sending into the WavesFactory TrackSpacer,
so when I hit play and the vocal is on, you're going to see some action coming in here. I'm
going to actually turn it all the way down.
[music]
That movement is the vocal. So now watch what happens. I'm going to take the filters on
the left and right here. This is the lows. I'm going to bring the low-pass all the way
up to somewhere like 800 or so. Maybe a little higher. 800-900.
Then, the highs I'm going to come down a little bit to around 2.5kHz, somewhere in there.
Now, I've set that range. Whenever I hit play, and I drag the ratio up, it's going to reduce
the music in that frequency range, almost like side-chain compression, but it's different.
It's going to push down that frequency range of the music when the vocal is active and
singing.
So, let's take a listen.
[song]
Okay, it sounded horrible, right? But you heard it working. So that's the point of this
exercise. I want you to hear it actually working. So let's listen one more time, here's all
the way in, pretty much.
[song plays]
And then, that frequency range comes back to the music whenever the vocalist is done.
Okay, so that's the extreme, that's just me showing you how it's working. Now, in between,
you heard that it was coming back, the music was coming back a little bit in between kind
of quickly.
Take a listen to that.
[song]
So those little [makes noise] is kind of opening up that filter.
Well, what I want to do to control that is I want to work with the attack and release.
So I'm going to set the attack I like. It's kind of working for me, but I'm going to drag
that release a little bit back.
Let's take a listen and see if we still get some of that pumping.
[song]
Okay. Now, there's less of it, but I still feel like we can tighten up the release a
little bit or extend the release so that when the vocalist disappears, the music doesn't
just all of a sudden come back and be full spectrum again. So I'm going to push this
release back, and let's go up here to the vocalist, and let's find where he's done with
that last note and where the music is coming in.
[music playing]
Okay, so it's coming in. I want that to come back in time. I want it to be almost a smooth
crescendo back to the frequency spectrum, so I'm going to push it back a little bit
longer.
[song]
Okay. It's a little bit slower, but I kind of like that. I want it to be subtle, I want
it to be gradual. So now this ratio that we've jacked up, I've
jacked it up to help us find the settings that we like, and then – you can use this
in mid/side mode by the way. This probably would be appropriate so that it's only affecting
that.
[starts song]
Okay, so that's pretty cool. I'm going to pull it back a little bit just so it comes
in just a nudge quicker.
Okay. I'm going to drag this all the way down. Now, I'm going to listen to it without it.
[song]
Cool. So that vocal, now that we've heard it the other way, it's like we need a little
more space there.
[song plays]
So let's try to gain some space for the vocalist, and we're going to just drive it up a little
bit as he's singing.
[song playing]
I'll boost it a little bit so we hear it.
[song]
Okay, so that's probably still too much, but depending on the song you're working on, that
may be perfect. It may be kind of cooler to have that as an effect. You can use this for
kicks and bass, you can use this for certain guitars that you want if you want the electrics
to push the acoustics down, or the piano to push the electric guitars down when the pianos
are coming in.
All kinds of things you can use this on, this is just one example, and I think it's going
to be a little bit more useful to us back down a little bit more subtle in this particular
mix.
But you get the point, you get the idea. Hopefully that helps you set it up. If you dig it, go
check out the WavesFactory TrackSpacer and feel free to write me. David@davidglennrecording.com.
We've got the new site, themixacademy.com. I'm going to take and mix this song start
to finish right in front of you. I'm going to record the entire process. 3, 4, 5 hours
long. There's a private forum, you'll get the files, you're going to mix it yourself,
it's going on your resume. All kinds of great stuff with it.
Right now, if you sign up, I'm offering an exclusive premium tutorial included with your
membership, so one of my three training courses. You get to pick one of those, and if you tell
me from this video that you got word about The Mix Academy from The Pro Audio Files YouTube
channel, I'm going to actually toss in an extra surprise for just you.
So check that out, themixacademy.com. Like, subscribe, share this with your friends, hopefully
that will help us to continue to give you great content, and we will catch you on the
next one.