hello today's video will be useful for those who want to understand the characteristics
of their camera and the characteristics for shooting today we'll talk about the frame
rate and what it is and what it is oh in the settings of your camcorder so let's first
deal with the first numbers that we see when setting up the camera and also action cameras,
no matter what, we have the so-called value as the frame rate in video cameras, the frame
rate is 2550 3060, and so on, there are still more other frame rate settings in professional
cameras, what does this mean, what is the frame rate, this is the number of frames which
the video camera shoots a unit of time, that is, per second, in this case, if we have a
characteristic of 25 frames per second, that is, we take and do 20, that is, your video
camera records 25 frames per second, if you have a card with a characteristic of 50, then
the camera accordingly writes 50 frames in the same second and here the main point is
that is, m, the higher the frame rate characteristic, the higher the recording quality is ordinary
standard camcorders that we sell to the navel and stores, for example, amateur ones such
as sony handycam, they usually shoot with a frame rate of up to 50 or up to 60 frames
over these 50 60 frames, such as there are 100 and 120 240 where some 960 and so on is
already the so-called slow motion this is when your camera records at a high frame rate,
respectively, you have the opportunity to see in slow motion what you were filming,
for example, there are special high-frequency video cameras that record with a resolution
of both 2000 and 4000 frames in for a second we can see the ignition of a match flash a
shot from any weapon, that is, in all details these are special cameras for such slow motion,
there are also professional cameras that can shoot slow motion someone is trying to shoot
slow motion enemies on an action camera, but as a rule it means if we increase the frame
rate, we drop the resolution to camera because I'm sorry we have such a thing as hardware,
that is, the processor of our camera, which has the ability to work only on certain characteristics,
so we still have characteristics such as oh and 50, let's say we take two characteristics
of the 50th 50p and many are wondering what it’s better to make it 50th or 50p, let’s
deal with this abbreviation first, what is pi is progressive scan, that is, when we have
a full frame, what is it, oh oh, this is line scan, that is, if we take a frame, then in
fact our frame is divided in half.
this is rough, but it corresponds to whoever and reality, it turns out if we take the characteristic
25p and the 50th amount of information recorded in these modes is almost the same, that is,
in terms of the quality of our recording, 25p and the 50th are almost the same, so when
you write video if you want to distribute it on, say, youtube or somewhere else on some
video hosting sites or on the Internet, that is, for your video channels there for your
sites, there is somewhere else, that is, in principle, 50th is enough for you, or is it
25p if you want write really in good quality, then do not be stingy, set the maximum characteristic
of your camera from here, that is, if you took the
characteristic in your camera and your camera allows you to write 50p, that is, set the
maximum 50p and adjust your camera to those capabilities, as a rule, cameras that have
we are amateur then and accordingly they are with us when setting the maximum possible
purity and resolution, that is, they give only one x be sure to write a message about
what you need to write a message on the camera monitor and many are wondering how we can
change, yes, nothing can change, that is, you ask the camera, say that you want to write
in the highest possible quality, respectively, the camera itself sets those characteristics
for the highest possible quality that you can just take and start writing some other
variations of the change you cannot make if you reduce the frame rate or reduce it and
let's say the scan will not be 50-50 for you and accordingly the camera will make it possible
to make other characteristics and in a different way adjust your recording quality, but I don’t
recommend writing today, let’s say that if you are going to write a high-quality video,
write it in the format in which you have the maximum resolution in the next video, I will
tell you how to avoid two standard common mistakes in this with such characteristics
errors, the effect of the train and the second error what you can do is adjust the frequency
to the flickering frequency of our fluorescent lamps that are in most rooms and thereby ruin
the recording, and for today in this video everything is accordingly if you liked the
video, put your fingers up, it will be clear to you that you are interested in this topic
if you are still interested in something in this topic, it became unclear write comments
below under this video a description of the characteristics of the cameras and what changes
where in which in Sony cameras, where I will set this frequency, I will put it under this
video.
and for today, everything was with you Albert and see you again