Oh hey
G’day I’m vamsi So you finally had the bright idea to set
up a SmartDNS to make your life easier Good on ya mate
Today we’ll see how you could set up Smart DNS proxy on you Windows or MAC
The odds are that you own a couple of devices with both of these operating systems you spoiled
brat.Not an everyday occurrence i grant you but It's definitely a useful skill to have.
intro
A Little precursor before actually get into the nuts and bolts is that you need to set
up a Smart DNS account which is free for a fortnight
and then its about 5$ a month .Once you have that don’t forget to configure two vital
settings in your my account tab which is to Set up your DNS server IP and to activate
your IP in the SmartDNS system.
SmartDNS proxy also does a VPN if you fancy
So without any further ado let's get to it
For you to setup a smartDNS on your MAC , 1.Firstly you’d wanna go to the system preferences
and then find Network . 2.Go ahead and click on Network to get to
your network settings.
3.Select the network that your MAC is connected to and make sure to select a wireless connection
to select airport for the older Operating systems.
4.Click on Advanced to go the Advanced settings window with all the different tabs
5.Select the DNS tab .Now you should make sure you remove the existing DNS in your system
before you key in the new ones by selecting the existing IP’s and click on the minus
button.
6.Once your done with that click on the plus button to add new DNS Proxy IP addresses,
just pause the video and copy the two IP address which is nearest to your physician or
Use the link down below to see the updated DNS server list of various countries
7.Use the closest DNS server IP as your primary and another one relatively close as your secondary.
For instance, say if I’m australia, then I’ll copy two dns server from australia,
and if there was only one available, then I choose another nearby australia, like new
zealand. 8.
Now, paste that dns servers in the network setting of your mac and then Click ok
9.Once you’ve done that Go to your smart DNS proxy account and refresh the page, if
you have done everything right, you’ll see a green tick next to DNS Setup.
10.
And once it’s there, next you need to activate the IP address, to setup your Current IP in
our system.
11.
And that’s it, now you stream videos without any restriction.
Though, Remember whenever your IP changes,(which will happen from time to time, since most
home users have dynamic IP address) then smartdns service will stop working for you.
And you’ll see a pop up from smartdnsproxy on your browser, asking you to LOGIN to and
UPDATE your IP address.
And it should to be working fine again,
Another thing that you need to know is, let say, if I want to watch netflix japan
instead of netflix us, which is set by default, then you can configure these kind of settings
by going to regional summary and click on update.
Your MAC’s a wee bit smarter now that you’re with SmartDNS.That’s a terrible joke .
Moving On
We still have Windows to jump through ;)
1.Go to the start menu and get to the control panel to access your network settings
2.Click the Network and internet link and then click on Network and sharing centre
Next you need to click on change adapter setting.
3.This shows you your basic network and connections.
Like you ethernet and wifi.
Right click on the the interface through which you’re connected to internets(most probably
it’s going to be your WiFi) and then choose properties
A new dialop box will pop up.
4.
Here make sure the IPv6 protocol is unchecked (in most case it’s )
and then double click on the IPv4
This will open another dialog box.
5.Now you’d wanna select the”use the following DNS server addresses” and key in the primary
and secondary DNS server IP addresses (which again you can see on the screen right now,
just sure these dns server is closest to your physcial location to get faster streaming)
And then paste them in the preferred and alternative DNS server IP’s
7.Make sure Validate settings by click on OK (if present) and do that again for wifi
propertise dialog box.
And that’s it.
9.
Close the window, and you might have to Restart your computer for it take effect.
Now, just like you did on your mac,
Go to your smart DNS proxy account and refresh the page, if you have done everything right,
you’ll see a green tick next to DNS Setup.
And once you’ve assured that you need to activate the IP address next ,
to setup your Current IP in our system.
And beepbidibapdi boop , You’re good you go.
Outro
So there you go that’s how you set up Smart DNS proxy for Window,Mac .
Are you having trouble setting up your smart DNS proxy ? Yell down below in the comments
section and let us know.we out here .we be helping out with team viewers and what not.
While you’re at it , don’t forget to like,share and subscribe before you’re mum walks in
. I’ve been vamsi from smartDNS proxy and
thanx for watching .watching keep watching these videos keep watching.That’s not a
proper sentence.