Hello friend welcome to my video
We practice with a small example like above
In this video you will learn how to configure a new Cisco ASA so that computers can connect to the internet
The Cisco ASA is installed as a pppoe client to connect to ISP
In most cases it is used between a private Network and the internet
The video guides pppoe dialing configuration for one ports on Cisco ASA devices
Create a ‘vpdn’ group, here I’ve called it INTERNET.
Set the authentication method here I am using pap
Supply your username and password
Apply your vpdn group to the WAN interface
show ip address outside pppoe
After pppoe connect
Next configure DHCP server
Create a DHCP address pool
To specify the IP addresses of the DNS servers the client will use, enter the following command
To enable the DHCP on the inside interface, enter the following command
Next, configure NAT to allow computers from the internal network to the Internet
By default computers in the local network cannot ping outside the internet
To enable ping, enter the following command
You can now browse the internet using any computer that connects to the internal interface
As always if you found this post useful
And subscribe to my YouTube channel
Help me 500 thousand subscribers