Hello guys, this is Diego Iorio from SIRS-E
and we are here in our R&D department
with exciting news
Normally when you have the need to have long runs
on RGB, RGBW, and White strips
controlled through DMX, there is a problem that
you have a voltage drop then
you can compensate the voltage drop with more controllers,
but the problem is that sometimes you have this
You have encountered this, when you connect
one DMX controller in the beginning
and another DMX controller at the end of the strip
you have flicker because of the
a de-syncronization of the DMX signal
between controllers, so any color you put
any intensity you put, you have
you have this issue,
so it is very difficult that way to run
long distances.
So now we have created a new product
and this product will allow you to run
to have continous LED strip runs
without voltage drop or flickering
and still maintain DMX control and dimming,
and color mixing like this
this is a Baxter Pocket Console
the only thing to do is generate DMX
So, now I am doing the same and
any intensity and we just add
the DMX-SYNC 4 in this case because we are using a
RGBW strip 4 channel
So where ever we do on the dimming
we don't have that flicker anymore
and we connect now a controller
in the beginning and a controller at the end of the strip
through our DMX-SYNC
So this is a break-through we just
thank God we made
Now virtually you can have extensive lines
of strips without voltage drops
with full DMX control and no flickering
So now-a-days with this technology
you will be able to easily create
and produce long runs
without any voltage drop or very minimal voltage drop
and then you can have no flickering
There is a datasheet on the website
that will give you all the technical information
and all the connections
Here's a drawing that we just made
that shows you the possibility of continuous
strip line without any problems.
You will find this link underneath the video
in the comments section
These will be available in three versions,
RGB, RGBW, and White.
So 4 channel, 3 channel, and 1 channel DMX control.
Hopefully you found our new product interesting.
If you have any questions,
or any set-up that you are planning to do
where you need very extensive large amount of straight lines
and to be able to control that straight line of lights,
give us a call, we have the product now.
Thank you very much!