Hey, I'm Aaron. And today we'll be going through the solution for Starburst.
This puzzle's a level eight on the Puzzle Master difficulty scale.
This puzzle, and many others are available at puzzlemaster.ca.
So we have Starburst. It's a dexterity puzzle.
That means we have lots of pieces and we're gonna be trying to slide them
together. But first we have to disassemble this guy.
So just taking a walk around the puzzle,
we can kind of see that inside corners,
we have like blocks of a color. And then we got a lack
sense of different colors. So like, this is what I'd call the white side.
So we're looking for the green side. So we can see the majority of the pieces are
green and there's a seam going through here.
So we'll just grab the tips of the corners
and we'll just pull it. If it doesn't come easy,
you got the wrong side. It should just slide apart very easily.
Okay. And from here, this pretty much falls apart. We can just....
And we got a bunch of little paper cranes, pretty much.
They're all identical pieces, other than color,
so we'll just sort them by color.
Now we will set our pieces like this on the table. We have the little logo sticking up
and we have this little fin here.
And we'll arrange all the black and white pieces, like so.
So it will look like this.
Okay. Now we will rotate
and slide it together. So now we have this little pin wheel set up.
And we will do that for all the pieces.
So we have four of these. We will move two of them off to the side.
We'll get back to those.
Now we'll take these two and we will just... we will
slide them together, like so.
Now we will take a green piece
and we will more or less... we want this to be sticking out.
So we can kind of just jiggle this in,
except for, I think I got this
a little bit messed up. So the logo will end up being here
and this will go behind.
So we just kind of splay out some of these pieces, whatever works,
and just kind of fit that in there. And it will go like so,
So we can see that piece there, the logo and this nub sticking out.
We will do that the same on the other side, but reverse.
So the logo is going to be up here now.
And that one went in pretty easy.
Pretty much, you'll just kind of splay and finagle it in.
And we have one piece built. We're looking to have these two pieces identical.
So we'll flip it around just for the sake of it.
And we'll do the same thing. So we got the logo
and we'll just kind of work this piece in.
We can even straight out remove...
Just put it on the black and white and
you can get it in pretty easy. It's not too bad.
There's probably an easier way to do this. This is just how I do it.
As long as you, you end up with this formation, it's pretty,
pretty flawless.
So like, so, and in. So now we have our two pieces that are identical
and we just turn 'em in on each other
And just line up the spikes
And it goes together. Well,
thank you for watching. If you enjoyed this video, we have plenty
more like it on our YouTube channel.
Haven't had enough? Join our community on Facebook or Instagram.
Want more puzzles? We have a massive catalog of puzzles at puzzlemaster.ca.