Hi everyone, Welcome back to geardo,
Today we will show you how to replace the charging port board on the Samsung
Galaxy S10 5G mobile phone. To start, we need to have the
right tools to proceed with the repair, which You can find in the description.
First, Take out the Sim tray and then the back cover removal.
To remove the back cover, it needs to heat gently
around the back cover edges until the pasted adhesive becomes soft.
For this, we are using a heating pad. Place the back cover side on the heating
pad and Select the mobile phone HEATING option and leave it till it completes.
Alternatively, you can use a heat gun or hairdryer.
Once the heating has completed,
Use a suction cup to create an opening between the frame and rear cover.
Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.
Next,
take out the back cover. Next, undo five screws and disconnect the connector
to take out the wireless pad. ANd also disconnect the battery plug.
Next, move to the bottom and undo four screws to pull out the speaker cover.
Next, disconnect and take out the headphone jack.
Next, to take out the not working charging port board, first undo three screws on the board,
and disconnect the main flex from the charging board.
Next, pull out the charging port board by disconnecting the plug from the logic board.
Next, Place and secure the new charging port board in the body.
Next, secure the main flex and charging port connectors to the board.
Next, secure three screws on the charging port board.
Next, place the headphone jack on the body by securing the plug.
Next, secure the speaker cover by adding four screws.
Next, add the sim tray and place the wireless pad by securing five screws and the connector.
And also connect the battery plug
Next, Before installing the main back cover, make sure it has enough glue on it.
If not, use B7000 glue or a new double-sided back cover adhesive.
Finally, we are using screen binding clips to tighten the back cover to the body.
If not, you can use rubber bands and leave them for some time.
I hope you have enjoyed the replacement guide.
Let us know if you have any questions; please share and comment on our videos.
DO not forget to hit the subscribe button.