Bendji D. here from Get Fixed and today we're gonna be going through a process
of replacing the iphone six-plus battery now this method is pretty much Universal
for the iPhone 6s plus the iPhone 6 and the iPhone 6s the tools needed for this
repair will be linked down in the video description below for some people
they're comfortable with using a suction cup and a prying tool but me on the
other hand I like to use a blade to pry open the screen the first thing you'll
need for this repair is a pentalobe screwdriver at the base of the iPhone 6
plus you are gonna find the two pentalobe screws you do want to remove
them now the next step is to pry the screen off personally I like to use a
blade to get it off but you could use a suction cup and also a prying tool
gently pull and enter the prying tool near the headphone jack just like this
Pow once you get enough of the screen real estate off you should be able to
pry the rest off with your fingers there it is
for this next up you're gonna need a Philips screwdriver for this shield
that's covering the connections for the front-facing camera speaker and back
facing camera and also for the connector for the battery there are a total of
five screws up here Disconnect the digitizer LCD front facing
camera now here's the most fun part of this repair back then when I used to do
repairs I actually did not know there were pull tabs here now that I know that
it's quite easier to get the battery out without having a damaged in so here's
what you do you actually peel off that little black tape that just fell off and
then you start pulling this white tab here after I pulled this one out I'm
gonna show you another example with this one
careful Oh If this pull tab ends up breaking
somewhere in the middle here then you're gonna have to manually pry out the
battery you don't want to do that because you could risk damaging it
careful
bow and if you want to successfully remove the pull-tab you don't want to
pull it out in angle because if you pull it on top of this shield right here
you're gonna risk breaking it be extremely careful now we're gonna take
off the second one alright now grab the white pull tab and start pulling careful
bow the build on the iPhone 6 versus the 6 plus is a bit different and here's why
now the taptic engine is actually located under the battery on the 6 plus
it's located underneath this shield right here
therefore you do want to make sure you remove the taptic engine underneath the
battery so that way when you're pulling a tab it doesn't break on the taptic
simply by replacement battery once again link down in the video description below
pop it in place connect the LCD digitizer speaker and front facing camera
now in this case we're just testing it out we're not gonna assemble
everything in place just yet
and hold the power button until the screen turns on by the way this is a
brand new battery but I accidentally dropped it in a bucket of Clorox so
therefore it will not function anyways once you tested your battery and you
made sure it worked all you somebody have to do is put the shield back in
place using the phillips screwdriver you want to screw all the screws also do the
very same thing for the battery connector shield if you have a success
in you remove the taptic engine underneath the battery you do want to
put that back in place screw it back in with the phillips screwdriver and you
pop the screen right in just like this
you want to be extremely careful when pressing down on the screen if it's not
aligned properly you could risk breaking it so extremely careful that pretty much
wraps it up for this video guys if you want to see more videos like this in the
future let me know down in the comments below if you're having trouble also let
me know down below anyways guys Bendji D. here from Get Fixed you know I'm out. Peace!