Oops
As promised I got a new scooter I told you guys I would tell you exactly what's going on this build for the day
That's what we're doing. Really somebody's along has to be going on right now. It's a literally the worst timing. Thank you. I
Have envy for like one deck a set of forks, and it looks like they're sent me extra just to be safe
So thank you guys so much over Envy shots and Tony Denny everybody over there. Thank you
So with this little care package, I have two decks here as opposed to one again
Thanks, if you guys don't already know my decks come in
4.75 wide by 20 point too long. I like smaller scooter decks
So kind just like my thing with an 83 degree headtube angle not super steep, but steep enough
So that's the deck. They also have the nylon breaks in there
So if you guys want to grab your deck you guys know where to go to adobe.com
Ask for grips. I did ask for darker colored grips
I've been riding the blue ones for a little while now
But I made sure to get some of these black and white swirl ones
I really really like these ones but I've never actually had the black and white
I've had the black and blue so these should be a cool little addition. They sent me two sets of these
So, thank you guys very much
I do go through grips kind of quickly, but not as quickly as some other riders, but quickly enough to where I need to
Why
Can somebody get a hold of their truck, please? Thank you as for Forks
I asked for the SOB VIII's because this is the fork that I've ridden basically for ever since I've been on NV and this time
You guys can be really really excited to know that I got the oil slick version yet again
I have not had oil slick on my spoon for a long time. You guys been telling me please ray?
Please go back to the blue and oil slick look that you've had
previously
so I listen so we got the most like smb3 in the IHC version the bars that will be going over my
IHC compression are the unions, of course, but this time I got the black unions
I have not had black unions in so frickin long. I've had it polished twice and I don't really switch my bars all that often
so I think I've had those bars on probably for
Like five months ish maybe less but either way I have not had black bars and Kuhlmann and these are the flat black. I
Run, my bar is pretty much stock light not pretty much stock height
I run them stock height as tall as they come. Stop talking crap. My bars aren't short they're as tall as they come now
The mystery bags I have no idea what's in these
What is that you
Headset you open it? Ah, there you go. Make it make the noise
We do have a bunch of bearings in here and we also have a blue clamp as well as in also clamp
I'm going to be putting the oil slick clamp on my shoe because like I said I want that was like look again we have
An envy headset right here. This is the oil slick headset
This will go nicely with my blue deck as well as the black bars and the oil slick hits it
Or the head or the clamp. I'm really getting confused. Okay?
Listen listen, listen, listen closely. Everybody should classic
Where's that?
Bearings bearings and headset go go go go. Hey, talk about oh, it's brakes. Yes
Troy that's a whole lot of great time
Looks like and you sent me a few of the fresh and that line breaks. Thank you guys very much
And we also have some spacers in here. So
a
shoe
Envy thank you for the brakes. Oh, look. There's a black clamp I missed that one. Thanks. You can guess what? This is
Wheels I wasn't even done. Yeah, I was gonna say get to punch in the face that works
That wheels. Yeah
Let's see
You got it, right looks like em, you sent us some people a complex man
But we must thank you guys so much for sending these and looks like we have one more set of wheels
And these are the ones that I requested
Yeah, get the back out of here. I
Got one
Thanks, that was scary we've got 120 millimeter black on oil slick
I am so excited to get oil slick back on my scooter
Which is kind of weird because every time I have oil stick on my scooter
I have it for like two or three rounds and I'm always like all over it
Alright, so that is all of our parts. A lot of you guys are probably wondering ray. Where is your grip tape? I
Left it in my house, and I had a lot. I told not to send me any my bad
So this bill tonight will be with no grip tape whatsoever. But everything else will be built up ready to go for the sesh
For whatever my leg gets better. So
Let's start the build
Oh
God
Oh
My god this thing turned out
Unbelievably good it actually surpassed my expectations. Now. This is why this scooter in particular
Surpassed my expectations all the other oil
Secutor x' that have had in the past have had oil SiC bars like that like the unions that I
Usually have and I actually requested for the scooter were the oil slick
but they didn't have any they only had the black and the polish and I've been riding the Polish for a while now, but
With the black on there as well as the black and white grips. It doesn't actually overkill the oil slick
That's one thing about oil slick is it's overdone so quickly and so easily and I've been looking for a combination
That I could do that could actually make it to where it's not overkill and this is it. This is like my dream
Setup. This is it. This is all the colors all the parts on here are the parts that I would always ride
Oh, I don't I need to take this out. I don't actually even
alright these
Now it's my dream build I don't run those plates because I don't use them
So there's really no point for me to have them on there
The only thing that I need so fullhart is grip tape, but I already know what good tip. I'm gonna put on there
I'm gonna put a sheet of Vital grip tape on this thing to make it totally complete, but all-in-all this thing is a beast
It's so freaking nice for some reason the wheels compliment the fork and I don't know why
Normally oil slick kind of complements itself because it's so loud. I got the black union bars on there
Like I said, I did cut the width on these ones a little bit smaller
actually
A lot of you guys in the comments are gonna be roasting me right now because of that
But I cut them smaller because I've been riding the same width for so long
I was at 22 and a half for a long time and I was just recently at 21
So I decided to go down to 20 and a half and just just see how it feels
I'm just kind of going all over the place with it because I like to experiment a little bit but on the bottom of those
Black bars. You got the oyster clamp. I don't run headset caps. I don't know why I haven't done it for a little while
Um, so I just put the actual headset spacers on there instead kind of pushes everything down and locks it in
I like it, but I am running an env headset. This is the integrated one best
I said I've ever ridden by far
I would love to get out there and actually tell assisting out
But unfortunately, I can't I'm kind of coming over and a really random and weird injury in the back of my left leg
Which is tied to my back injury, so I got to wait it out
Unfortunately, and I'm not good at this stuff, but I promise people I wouldn't ride so I'm not gonna ride
But please go down in the comments and rate my scoop 1 to 100
I would love to hear what you guys think about this thing
And if you don't like it, let me know why if you do like it. Let me know
Why what's your favorite part about the scooter? Is it the oil slick is that the deck? Um is the fact that I have?
No, grip tape on you could like that. Andrew hag if you're watching
Much love, but I love it. I absolutely love it. Thank you to env scooters for sending me all these goodies
You guys are absolutely the best
Shout out to Tony for listening to me when I said that I needed a new scooter
Which I kind of shouted them out in this video right here
So go check that video out if you haven't yet Kol since you're watching. Hope you're doing good. Well now that this is done
I've got a huge mess to clean and to be 100% honest with you
I'm Way better at building scooters then staying focused when it comes to cleaning things. So
Until next time I got a lot to do