The engineering drawing of the iPhone 14 finally came out
, and we have
not sorted out the news of the iPhone 14 for almost two months.
Then we will put the engineering drawing today
and compare all our previous news. What
are the gaps or what we have seen?
Different places,
put it all together
and share it with you.
Now the general arrangement of all
the
news of the iPhone
14 so far, let’s start
. Hello everyone, I am Apple’s father . In a month's
time , we can also see that the
mobile phone case manufacturers may use this engineering drawing
to make molds,
make these molds,
casings , etc. In the next step, we will see
maybe some model machines. Outflow
We look at these conventions in the past two years,
or in the past many
years , these engineering drawings that flowed out at about this time,
and compared these molds
with the actual mobile phones that were launched later.
In fact, there is not much difference between them.
We can say that at least in terms of appearance It
's just like what they look like. Of course, the internal hardware cameras, what specifications, etc.
We can't fully see from these 3D pictures,
but we can analyze from some details what kind of specifications
it may have. Maybe the
camera The charging hole
, we will talk about this part today.
The news about the iPhone comes out every year
to this engineering drawing.
When these 3D drawings come out, the
general fruit fans may experience some changes
in their mood. We may expect that there may be four cameras
. Now the project is The picture still has only three cameras
. Of course, we will gradually convince ourselves that
there must be a reason for Apple to do this. Like the previous dual-lens,
other manufacturers have dual-lens first,
and then Apple is still a single-lens
. Then we may I will convince myself that the performance of
Apple ’s one lens is very good
without the need for dual lenses. In fact,
Apple’s camera performance was really the best in the industry back then,
so maybe it makes sense,
but Apple still launched dual lenses
later . The screen ratio is a place where
Apple
was launched relatively late
. Some people said back then that
the iPhone should have black borders on the top and bottom,
right? And if
you have black borders on the top and bottom, when you hold it and use it, the
palm will not be pressed.
To touch something by mistake, etc.
This kind
of design is better,
but Apple can still launch the iPhone 10 later to
increase its screen ratio, and
then there is the bangs.
Many people say that the bangs are Apple
's higher recognition. Ah, you can only
know that you are using an iPhone
. Now, the engineering drawings of the iPhone 14
are flowing out, and I can see that
its bangs are finally removed,
so we have to accept it anyway
. To put it better,
Apple has its own
They're always going their own way.
In fact, it's really Apple that's producing the
iPhone at the
volume they need. And of course, there's a lot of new technology and new components.
Apple's production requirements are relatively
high
to be
used
on the iPhone, and relatively speaking, it has its difficulties,
but we must honestly say that some things seem to have existed for a long time, and
the production capacity should be enough for Apple to use,
but Apple may not be able to. It's
OK to
walk it slowly
. Let's take a look at the engineering drawings this time. Let's take a look at the bottom of it.
This may be where many people will be disappointed
. Let's look at the bottom of this engineering drawing.
Let's just look at it. The
width and thickness of the charging hole should still maintain the Lightning port
. Of course, let's take a precautionary shot.
These are the engineering drawings so far.
How is it actually? When mass production starts later,
there will be
a closer time. We will continue to follow up and report to you.
As for the charging power part
, it is not necessary to say that it seems to
be affected by the Lightning charging power.
In fact, Lightning can still support a
relatively high level. As far as the current iPhone 13 Pro Max is concerned,
it can support up to 27W
. Of course, because of its body size and
its
relatively large battery,
it has become the only phone in the iPhone 13 series that supports 27W.
But this time on 14 Above the series,
we expect that there will be a
mid-level entry-level version of the 14 Max,
so it will be the same size as the Pro Max. At
this time,
there may be two in the 14 series that can support fast charging power,
so Apple is selling today.
18W and 20W fast chargers
ca n’t achieve their fastest charging power. For the
30W charger that Apple is currently selling, the
price is NT$1,490
, so in my own words,
I would
still choose to use the sub-factory.
OK, then let's thank
our sponsors today. Only
with good
sponsors can we continue to produce good videos
. Today's sponsor is
Aukey, represented by WitsPer
.
Give the audience a lottery.
If you want to know how to win this fast charger, you
have to watch this video
about Aukey's gallium nitride fast charger.
Actually, I also had a video before introducing
their full range of products.
Now they have launched a new one.
A very, very small 30W fast charging head,
it can fully support
the fast charging power of all sizes of iPhone.
If you want to use it to charge
the flagship series of Samsung Galaxy,
such as 25W super fast charging,
it can also support it,
even if you want to use it to charge the iPad
It is also enough for
the whole series or
MacBook Air. The price of Aukey
's Minima 30W is only about 1/3 of the original price,
$ 590 NT.
Even 30W
is much smaller.
It supports PD fast charging protocol
and PPS fast charging protocol
. It can also reduce
the heat level of the
device under high-efficiency charging.
Under good control, it can
maintain a higher charging power for a
longer period of time, and it can also protect the health of
the battery. This Aukey, like its other series, can also be folded
at the prongs, so you need to
If you throw it in the bag,
you don't have to
worry about the pin being crushed
, or it may puncture your bag
or scratch other items
. If you have multiple devices and
want to charge at the same time,
you can also consider what we introduced earlier.
Like the two-hole or four-hole series, the
double-hole can support up to 65W
, so you can choose two Type-C
or one Type-C and one Type-A charging head.
In addition, the four-hole Omnia Mix 4
It can support up to 100W charging.
This means that you have to use it to charge
the largest MacBook Pro 16-inch. It
can also support it.
If you use the original purchase link below,
you can get a 24-month original factory warranty.
If there is a need, you can go and have a look
. If you want to win this
Aukey Minima 30W charging head,
you can leave a message below and
say what device you want to use this charging head to charge
, then we will be below. Pick
a lucky audience and you
can get this Aukey fast charging head
. Okay, let's notice the
camera on the engineering drawing. Let 's look at
it from the side. From the
side , you can see the protruding part of the camera.
The expected design of the fuselage is not the same.
In fact, when the news came out,
I put it forward and said that
if the fuselage is really cut,
there must be some compromises. Do you want to thicken the body,
or do you want to lower the quality of the camera?
If it is impossible to thicken the body, it is not possible
with the current design language. If you thicken the body,
it will be at
right angles.
The hand feel will definitely become worse
. For now,
I think the thickness is already tight.
I do n't think Apple can thicken it.
As for the camera itself, how do you put it in each of
us ? A generation expects it. The
camera has to improve
and then reduce its size.
I think it is difficult with the current technology.
Let's talk about the part of the telephoto lens first. There
may be a solution.
You use that kind of refraction.
There may be a way to make it thinner,
but for the main lens, we expect to say that
when the aperture is increased, the photosensitive element is increased
, and the pixels are increased, how do you make it?
The volume is even smaller
, so I think if I have to choose,
I would rather choose a better image quality
than a smaller camera module.
I believe Apple will make the same choice.
Also , the camera module on the iPhone 14 this time
should still maintain the design of two lenses,
because if the Pro series still have three lenses, it
is unlikely that the 14 will be upgraded to three lenses. The
previous 13 series
used the 12 Pro Max. The main lens of the series and
its ultra-wide-angle lens
also inherit its shortcoming of
not being able to
take close-up shots. At the beginning, this was also one of my opinions.
If you inherit from the previous generation, it is
a way of not being able to take close-up shots.
I think there are
many close-up shots.
A shooting mode that everyone needs,
whether it
's scanning IDs or whatever,
if you're in the previous
generation
, when you knew there was this problem, and
you still followed
it , I can't accept that,
so hopefully this time on the 14th,
they can do it once.
To improve this problem, even if you want to use
the camera module of the 13 Pro Max,
it can also solve this problem.
Don't let the same problem be passed down
again . Let 's see the positive part.
This time I think
many people are looking forward to it the most.
Update You can
see that its bangs are gone.
It still has two holes punched on it.
One small hole is for the front camera
and the other is a pill-shaped
hole for its Face ID module
. This is where we have to say
a lot of people. Since you want to remove the bangs, why are the holes still on the top?
I think it actually has its necessity.
Let's talk about the camera first.
Now various manufacturers have to solve the problem of the front holes
or the bangs of the front module.
Their best way is
probably
to hide the camera under the screen
and then cover it with pixels,
but even if you
can see it on the best Android devices now, its image and performance in the front lens
are certain.
I personally don't think it's worth the
sacrifice . In order to hide this small hole,
I believe that Apple is unlikely to say that
it gave a front lens
and the picture quality is not so good. In order to hide this hole,
come to the place of
Face ID. If Face ID is to be hidden in the way of hiding pixels, I think it will
affect its security and accuracy,
because Face ID is still very dependent. To scan your face, construct
this 3D not only when you scan
it , but also when you unlock it, you need to
scan your entire face quickly in a short period of time
and then judge and calculate
this situation.
I think it is safe to use it in that way.
Sex and accuracy
will definitely have an impact.
Some people may ask that it's better to use fingerprint unlocking.
In fact, now that iOS 15.4 is launched,
they now have Face ID 2.0
. If you don't know, it means
if you use iPhone 12 and 13 series
Now after updating to the iOS 15.4 system,
it allows you
to unlock while wearing a mask.
This is not just the unlocking of the phone at the beginning,
including Apple Pa y There are also any
financial
apps in any app that require Face ID authentication.
It allows you to wear a mask to unlock
it. Its accuracy and security are still very high . Now with this Face ID 2.0,
fingerprint Is it necessary to unlock it? After using it for a while now,
I really don't think I will miss fingerprint unlocking
. Of course,
if there are two options, it
may be
that you can choose whichever you prefer. One. But
I think if Apple still wants to maintain the Face ID module
and then use the hole,
I don't think it is necessary.
They will add a
fingerprint unlock module below,
whether it
is cost or necessary. In
terms of sex, I
think that Apple may not make such a choice.
Since Apple will not make such a choice
,
it means that the security and accuracy of the Face ID module will become very important. At
this time, I think they use the phone
The hole method is the safest way to keep Face ID
and remove the bangs at the same time.
I think generally everyone can accept it.
It is said that only
the 14 Pro and Pro Max series
will have this kind of hole punching method this time. The screen is on the top
14 and 14 Max, and the previous bangs are still
retained . I think it
's okay because many people who buy iPhones
may not care about bangs.
If they really care, they may choose Pro
and bangs. The Pro Max model,
but I am now
thinking about how to adjust the proportion of my YouTube video in the future,
because there will be models with bangs
and punched holes, so should I make the whole screen
or only the bangs ?
I have to think about this again. Another
good news is that
it is not visible in this picture, that is, where the material of the fuselage is located.
This is also the news that came out last year,
that is, it is said that
they will use titanium alloy on the frame of the fuselage.
This material is
one of the methods that Apple is
currently trying. Will it be the case in the end
because it has been passed on for more than a year
? We are not sure if it will come out in this generation, so
why use titanium alloy? Under the same volume,
titanium alloy
is slightly lighter than stainless steel,
but if we now want to say
that titanium alloy is a harder metal
, will they be able to reduce its volume a little
more and its metal content?
To achieve the same level of consideration, at
this time, compared to the previously used stainless steel, its weight
may be reduced a lot
, but will this weight reduction be directly reflected in the overall body
we get? Actually, it is not
. It must be
because if they say they
can reduce the weight of the frame, will they want to make up for it in other places,
like maybe the point of battery life?
Many people say that using 5G is very power-hungry
, because now the body is slightly lighter
They can either increase the battery's capacity a little bit
to increase its battery life,
or in the case of the camera module where the weight of the camera module
they put in a better camera module
may also increase ,
and use the weight of the body to reduce it. Make up
so
we are not sure which direction Apple will go in.
Is it simply to reduce the overall body weight, or to
trim it
elsewhere in
order to put in better battery life and better
camera modules? Let
's see how Apple solves this problem.
Personally,
I think the weight of the iPhone is a bit heavy.
I use a Pro Max model. It is so
heavy that I feel
a little bit wanting to use the Pro model down,
but I am very heavy.
I like its battery life.
I want to hear what you all
think about
the weight of the iPhone you
are using now. Can you accept it, especially
for those who use Pro and Pro Max models
? Just to buy this texture,
and there are other questions. Your news about the current iPhone 14 as a
whole
has spread to
now. First, as I just said,
there may not be USB Type-C
. What are your thoughts? There are only two sizes
, 14, 14 Max, 14 Pro, 14 Pro Max . In this case,
they may have
made a bigger separation in the camera screen bangs, maybe even in the processor inside. At
this time, you will What kind of choice, I
also hope that you can leave a message below
to discuss what you all think
or what different opinions
you have, and even what you know. Maybe
there are other news that I haven't mentioned,
you are welcome to leave a message below
. Okay .
Today's video is here first. If
you like it, remember to subscribe to the channel,
press the little bell, like and share.
I'm
Apple Daddy . See you in the next video, Bye