this video is to help a guy who's been digging a well using the same method
that I used and it's come across a little problem actually several and he's
thinking about giving up and I'm going to give him the same kind of
encouragement that y'all gave me when I was going to give up on my table saw so
this is 483 Colson here's what you do here's your casing you get a soup can a
massage you can fit down the case
this is going to be real time I'll try to do it real quick I got a trouble with
a cutting tool on
I got the gun
I'm bad but if anyone at this time
you
alright this is what I have
then car needlenose pliers
you open it up to about the size you think pea gravel might be turn around do
the other side the same way
here's what you got when you turn it of course it will be upside down but when
you turn it it will scoop up that pea gravel into this here's what you do
not couple of holes in suicide
stick some like a stick over even you could even drill a hole into the pipe
that you have
education slides down the casing to the P travel
turn it when it fills up pull back up and dump
it out when you get through the pea gravel close these up a little bit like
maybe a quarter of an inch and you can get the the mud out as long as it's not
too watery it's really watering you'll have to close these up even more but you
can do this don't give up man you've got a lot of work on that well and and the
money to buy the auger you know give it one more shot you can do this
hope this helps