WE WILL BE BACK.
IT'S
TODAY FOR MY CRAFT PROJECT
OF THE WEEK WE ARE GOING TO
MAKE SOMETHING FOR YOU TO USE
INDOORS OR OUTDOORS.
TODAY I'M GOING TO SHOW YOU HOW
TO MAKE A 10 CAM LANTERN.
TAKE THE LABEL OFF.
MAKE SURE IT'S NICE AND CLEAN
AND YOU WILL CHOOSE WHAT YOU
WOULD LIKE TO PUT ON THE FRONT
OF IT.
MAYBE THIS BEAUTIFUL ROSE THAT
IS QUITE INTRICATE OR YOU CAN
MAKE YOUR OWN PATTERN WHATEVER
YOU WOULD LIKE TO PUT JUST GET
A PIECE OF WHITE PAPER FOLDED
IN HALF THE LONG WAY AND YOU
CAN DRAW YOUR OWN PATTERN.
I DECIDED TO DRAW A TWO LOOP
AND THEN YOU PUT CIRCLES ALL
THE WAY AROUND THE TWO LOOP
WHICH ARE GOING TO INDICATE
WHERE YOU'RE GOING TO PUT THE
NAIL HOLE.
THERE'S GOING TO BE NAIL HOLES
THROUGH ALL OF THIS.
THIS IS WHAT'S GOING TO HELP
THE LIGHT TO SHINE THROUGH SO
YOU CAN SEE YOUR PATTERN.
THERE IS A LARGE TULIP AND A
SMALLER.
LOTS OF OPTIONS FOR THE FIRST
THING WE WILL NEED TO DO IS PUT
WATER IN YOUR CAN AND YOU WILL
NEED TO FREEZE THAT.
YOU WILL PROBABLY NEED TO PUT
IT IN THE FREEZER FOR AT LEAST
THREE HOURS.
I LEFT MINE OVERNIGHT.
IT JUST DEPENDS ON HOW MUCH
TIME YOU HAVE AND I FOUND
BEANBAGS AND THEY WERE A GREAT
PLACE FOR ME TO PLACE THE CAN
WALLI HAMMER THE NAIL INTO THE
CAN.
I'M GOING TO USE THE ROWS.
I LOVE IT.
WE ARE GOING TO TAKE THAT ON.
MAKE SURE YOU HAVE SOME MASKING
TAPE.
JUST MAKE SURE IT HOLDS IT IN
PLACE WHILE YOU ARE WORKING ON
THE SURFACE OF THE CAN.
THIS IS GOING TO MELT FAIRLY
QUICKLY SO YOU'RE PROBABLY
GOING TO NEED TO START AT THE
TOP MELTING FIRST.
THE FIRST THING YOU WANT TO PUT
IS A PLACE TO HANG YOUR
LANTERN.
SO YOU'RE GOING TO WANT TO PUT
A HOLE IN EACH SIDE.
MAKE SURE IT'S EVEN STRAIGHT
ACROSS AND AFTER YOU PUT THOSE
IN GET STARTED AS SOON AS
POSSIBLE.
LIKE I SAID THIS ROSE THAT I
HAVE CHOSEN IS VERY DETAILED.
IT'S GOING TO TAKE A LITTLE BIT
TO GET THIS DONE.
I USED A SMALLER NAIL TO GET
STARTED.
YOU WANT TO WORK CLOSE TO THE
TOP OF THE CANNED BECAUSE IT
MELTS THEIR FIRST AND HE WON'T
WANT TO DILLYDALLY.IT MELTS
VERY QUICKLY AND AS YOU CAN SEE
THE PAPER STARTS TO GET WET.
YOU DON'T WANT IT TO RIP OFF OF
THE AIR BEFORE YOUR PATTERN IS
COMPLETE.
WHEN IT IS FINISHED, YOU WILL
TAKE THE PAPER AND THE TAPE OFF
AND THEN YOU WILL WANT TO GET
"I" AS THEY CAN.
YOU CAN LEAVE THIS CAN AS IS
BUT I HAD A COUPLE OF IDEAS.
I THOUGHT IT WAS A BIT BORING.
WHEN YOU HAVE GOT MICE OUT MAKE
SURE YOU DRIED OFF NICELY I
TOOK IT OUTSIDE AND SPRAYED IT
A BEAUTIFUL TEAL COLOR.
LET IT DRY FOR 20 MINUTES AND
BRING IT INSIDE AND WORK ON IT.
I FOUND THESE BEAUTIFUL NAPKINS
THAT HAVE A LITTLE BUTTERFLY ON
IT AND HONESTLY YOUR PATTERN
FOR THE LIGHT IS JUST ON ONE
SIDE SO YOU WILL WANT TO DO
SOMETHING TO THE OTHER SIDE.
BUT FIRST I DECIDED MORE
REFLECTION WAS NEEDED.
JUST A LITTLE BIT OF TINFOIL
WITH MODERATE POTTAGE ON THE
BACK AND ON THE OPPOSITE SIDE
OF WHERE THE NAIL HOLES ARE
MAKE SURE YOU DON'T CRUNCH
ABOUT.
THAT'S GOING TO GIVE A LITTLE
BIT MORE LIGHT REFLECTION WHEN
YOU PUT YOUR CANDLE IN THERE.
IT'S SPEAKING OF THE BEAUTIFUL
BUTTERFLIES I PUT THREE ON
THEIR AND ON THE BACK AND THEY
ARE VERY DELICATE SO BE VERY
CAREFUL.
WHEN YOU GET THOSE ON THERE, OR
WHATEVER ELSE YOU CHOOSE TO PUT
ON.
I THOUGHT IT WAS A GREAT IDEA
JUST TO MOD POTTAGE THE WHOLE
CAM BUT YOU DON'T WANT TO PUT
TOO MUCH BECAUSE YOU DON'T WANT
TO COVER THE HOLES.
YOU WANT AS MUCH LIGHT TO SHINE
THROUGH THOSE AS POSSIBLE.
THIS IS JUST GOING TO MAKE IT
NICE IF YOU ARE GOING TO USE
THIS OUTSIDE.
I DECIDED TO PUT A LITTLE BIT
OF TRIM ON THERE JUST TO BE
FANCY AND WE ARE GOING TO USE E
6000 FOR THIS.
SO PUT IT ALL AROUND THE BOTTOM
OF THE CAN.
THIS IS NOT ALWAYS GOING TO BE
LIT UP SO I THOUGHT IT WAS NICE
TO MAKE IT SPECIAL SO YOU CAN
DISPLAY AT ANY TIME.
IT'S PUT THE TRIM ON THEIR YOU
CAN PUT THIS IN THERE TOGETHER.
YOU'RE GOING TO WANT TO DO THE
SAME THING TO THE TOP OF THE
CAN AGAIN.
WE PUT IT ON THE TOP.
THAT'S GOING TO DRIVE PRETTY
QUICKLY.
NEXT IS JUST TO PUT THE LIGHT
IN AND LOOK AT THIS DARLING
LITTLE BUNGEE CORD I FOUND THAT
WORKS PERFECT FOR A HANDLE.
LET ME SHOW YOU WHAT THIS LOOKS
LIKE WHEN THE LIGHTS ARE OFF.
ISN'T IT GORGEOUS?
I JUST LOVE IT.
AND HERE IS THE ONE WITH MY OWN
PATTERN I THINK IT TURNED OUT
REALLY NICE.
THIS WAS A FUN PROJECT, JEREMY
AND THEY WILL BE GREAT ON THE
PATIO WITH THE UPCOMING WEATHER
AND WE WILL TAKE A CLOSER LOOK
AT IT.
IT'S HARD TO SEE THE LIGHT WHEN
IT'S DAYLIGHT AND THE STUDIO
LIGHTS ARE OUT BUT IT WAS NOT
THAT HARD TO DO AND THEY ARE
FUN TO MAKE.
THESE ARE JUST FESTIVE LITTLE
GLASSES WE GOT AT TRADER JOE'S.
WE WILL TAKE A CLOSER LOOK AND