Introducing Caseta Wireless Adjust your lights with a remote control
In this video we'll show you how to install and
set up the Caséta wireless plug-in dimmer kit.
We’ll cover: Installing the plug-in lamp dimmer,
Pairing the plug-in dimmer and Pico remote control,
Changing your favorite light level setting, And finally, adjusting the dimming range for
LED and CFL light bulbs.
Let's get started.
Installing the Caseta wireless plug-in lamp dimmer is easy.
Before you start, keep in mind that you can mix and match dimmable LEDs, dimmable
compact fluorescent bulbs, or CFLs, as well halogen and incandescent
bulbs with Caseta wireless dimmers.
First, turn on the lamp you want to control with the dimmer and unplug it.
Next, plug the lamp cord into either end of the
plug-in dimmer, and plug the dimmer into your wall outlet.
To add a second lamp, first unplug the dimmer, turn on the lamp and plug it to the
other side of the dimmer.
Then plug the dimmer back into your wall outlet.
Pairing the dimmer and Pico remote control
To pair the dimmer and the Pico remote control, press and hold the “off” button on the
dimmer for 6 seconds, until the LED on the dimmer starts blinking.
Then press and hold the “off” button on the
Pico remote control for 6 seconds until the light you are controlling flashes
3 times.
Repeat these steps for any additional Pico remote controls.
And that’s it!
Now you can control your lamp with the Pico remote control, from
anywhere in the room.
Changing your favorite light level setting
You can use the round “favorite” button on
the Pico remote control to recall a favorite light level.
We’ve set it to 50%, but you can change it to any level you like.
Here’s how: Use the brighter/darker buttons on the
dimmer to adjust the light to the level you want for your favorite.
Then hold the “favorite” button on the Pico
remote control until the LED on the dimmer blinks twice.
Your new favorite light level is now saved.
Adjusting the dimming range
If dimmable LED or CFL bulbs turn off unexpectedly while dimming
or flash, strobe, or flicker, adjusting the dimming range can help solve the problem.
To begin adjusting the dimming range, press and hold the “on” and “darker” buttons
on the dimmer for 6 seconds
until the LED on the dimmer starts blinking, then release the buttons.
Next, hold the “darker” button until the lamp is fully dimmed, or off
and then tap the “brighter” button until the bulb is on and doesn’t flash,
strobe, or flicker.
To save your new settings, press and hold the “off” button for 6 seconds until the
lights turn off.
Using either the dimmer or the Pico remote control, turn the lights on and adjust the
level to test the dimming performance.
Please see the quick start guide on casetawireless.com to make sure you don’t
exceed the maximum wattage if you mix and match bulbs.
Note: If you’re using LEDs or CFLs with the
Caseta wireless plug-in lamp dimmer, make sure to use only bulbs marked or rated as
dimmable.
Many dimmable bulbs from manufacturers such as Philips, GE, and
Sylvania have been approved for use with this product.
For a list of approved bulbs please visit casetawireless.com
If you’re still experiencing problems with the
bulb, make sure the bulb is on the approved LED/CFL bulb list, then repeat these steps.
To learn about the entire family of Caseta Wireless dimmers and accessories, visit
casetawireless.com