hey guys this is rich and today on what the tech we're gonna take a look at alignment what it is
how do you go about checking it alignment one of those bug buzzwords anybody that's been around
HPA for any length of time is heard but a lot of people don't really understand it or don't
really feel comfortable with checking it and adjusting it so we're going to take a look at
how we check alignment and some ideas on how you go about fixing it so let's jump right in
alright so the way people have been checking alignment for quite a while and this is the
way we suggested quite a while ago is basically this is your barrel this is your hop-up basically
shining a light up the feed tube and then visually looking down the barrel and you can see generally
when you're looking down there where you're gonna be able to see is you're gonna be able to see the
barrel you're gonna be able to see the nozzle as well and then now the nozzle will either look nice
and centered like it should or well look off to one side or high above something like that and
you can see where you need to adjust it so let's talk about why that method is not wrong per se
but I'm not always completely accurate what ends up happening sometimes is the hop-up fits into
the front of the gearbox you can actually get into situations where if if that fit between the hop-up
and the gearbox is tight for instance again here's our barrel it will be held in place by the gearbox
here's our gearbox over here and it'll it'll need to line up with the gearbox over here but
that line is not straight with the barrel so but it gets forced into that position then what you
end up with is one of two things either you bend the barrel a little bit to make it fit in position
or the parts within the hop-up themselves shift a little bit with respect to each other so that
it can line up but either way the end result is when you're looking down because it's still held
Center the hop-up itself is held centered on the gearbox real closely it'll still look like it's
centered it'll still look good in your eye isn't gonna pick up on the slight curve in the barrel
or the parts being being shifted a little bit sometimes it'll it'll look good and then you'll
take it apart and you'll find that the nozzle maybe has some marks like it's rubbing on the
hop-up or or something along those lines or it's still not shooting real well but it looks good so
we're gonna talk about an alternative method for how to how to check the alignment that works a lot
better so what you're gonna need is your gun and a donor barrel and that's about it you need those
two things and maybe you're gonna want to do it in a pretty well lit area so you can see clearly
but other than that don't need a flashlight don't need anything like that so let's talk
about how to do this okay so what we're gonna do is going to take our barrel as you can see we've
got the system installed in the gearbox and we have removed the hop-up and barrel from the gun
you want a barrel with the hop-up off and I'm gonna do is I'm going to slide the barrel down
the inner barrel if you watch be able to see it come out right there and all I'm gonna do is this
lets me visually check whether it's lined up you can see if the nozzle actually lines up correctly
from the side and you can look from the bottom and see it lines up well from the bottom now there may
be some guns that this is doesn't work real well on but for the most part especially any stage
damn for this is by far the best way to go about checking and you can see where you need to adjust
it if you need to adjust it alright so you found that you've checked your alignment and you found
that it's off for some reason we can't cover every single gun and how you would go about fixing it
we can't even really cover every single variant because there's a lot of them but give you some
general ideas specifically for m4 style platforms as far as how you might go about adjusting it put
the receiver apart here there's basically two ways that the that the alignment can be off it can be
off vertically it can be off so side to side of the two generally side to side is a little easier
and more reliable to fix generally basically what you're gonna do is you need to space the gearbox
on the two sides here between the receiver and the gearbox generally we put just a drill and put in
some set screws on each side and that allows you to adjust it so right down in this location I put
a screw in on that side I'm gonna screw down in on that side and then you can adjust it back and
forth and you can get it centered right where you want and once you get it you can lock tight those
screws in place and they'll never move and it reliably goes back together the same way
every time vertically is a little more a little more tricky if that's off sometimes because in
theory this shouldn't this gearbox shouldn't be able to move vertically in theory it's held in
place by these two pins however sometimes those pins either are not in the right location or
they are loose so the gearbox has some slop in it one way or the other if it's off vertically
generally what we will do is we'll remove this front pin for just remove that guy and and just
try to adjust the vertical with the back pin in place the the back body pin there in place on a
lot of guns the reason that most most often when we see the alignment off vertically what we see
is it's too high the nozzle is sitting up too high in the receiver usually this is because the buffer
tube is going into the back of the gearbox this one's been modified you can see so that's not an
issue on on this this platform at this point but it's going into the back of the gearbox with the
buffer tube adapter and that's getting tightened down and that's pivoting the gearbox around at
this point and it's pulling it rotating the gearbox backwards or counterclockwise which
pulls the nozzle up if that's what you're finding what you're going to want to do is loosen the
buffer tube up and tighten down the grip screws first because those grips screws are pulling on
an angle like this and if we remove this pin now when they're pulling they're pulling the front of
the gearbox down lower so you're gonna if it's too high which is by far the most common thing
we see with alignment on em fours just go ahead and tighten the grip down first maybe tighten
it down a little bit at a time and you can go back and check the alignment as you go put the
top back upper receiver back on and check it a couple times and then then Snug down your your
buffer tube screw and don't just go nuts on that Snug it down as much as it needs to be but don't
don't crank it down super tight because you might might pull it back up usually that those methods
will will get you lined up sometimes in more extreme cases you may find that it just the
gearbox can't sit in the right position in the lower receiver this usually is because people are
using a mismatched gearbox and receiver they're using a different brand gearbox than the receiver
they're using we don't really have time to go into how to fix that issue right now but generally we
just recommend use the same brand preferably the same gearbox that came with the gun but at least
the same brand gearbox so that you don't run into that type of a situation that's generally how we
go about fixing basic alignment alignment issues I highly recommend using this method running the
barrel down visually check how it lines up with the nozzle because it's going to make it makes
it much easier to pick up on misalignment then the way it's been done in the past thanks for
watching guys I hope this was helpful to you if you have any questions or comments be sure
to leave them in the comment section below and we look forward to seeing you guys out on the field