- What's up everybody?
Welcome to Chemical Guys Detail Garage.
The other day
you saw us unveil our brand new TORQ15DA polisher
so I thought this would be a good time to show you guys
what you're getting in the kit
and how to use your brand new machine.
So right off the bat
you see you have this awesome new graphic.
This box is very eye catching, very sleek,
but we'll get to that in a minute.
We're gonna go over the chemicals
as well as the pads that are included in your kit
so you know how to use 'em and when to use 'em.
Let's start over here with our chemicals with V32.
Now this is a very abrasive compound
that removes deep scratches and swirls, oxidation,
heavy blemishes, anything else that's really aggressive
and this is going to be the best way to restore shine
because you need something really heavy
to cut through all that but once you cut really deep
you need something to refine that.
Which brings us to V34,
which is a minor abrasive hybrid compound
which is going to help you to refine the finish
and it's going to carry out your whole high shine,
remove any kind of blemishes and any kind of imperfections.
But again, if you're doing a multi-step polish
you're going to refine it even further
or if you want to start off
with the least aggressive approach
we always recommend starting with V36.
This is one of the great ways to test
and give yourself a test spot on your vehicle.
So it cleans up
any kind of imperfections left behind by V34.
And then lastly with V38,
this is just a very fine jeweling polish
to help you remove any kind of holograms, tiger striping,
or anything else that's left behind.
This way again you're getting the best finish,
that factory shine and the best look overall.
Now over here we have our pads.
This is the three included pads in the kit
starting with your orange Hex-Logic orange pad
which is going to be your cutting and compounding pad.
You can use your V32, 34, and 36 with this pad.
This is gonna give you a test
and range of seeing what your car needs
because just like everyone else is different,
all of your cars are different.
So the needs of the polishing
are obviously going to be different from car to car.
So you have to test it with different kinds of chemicals
and different kinds of pads
but find the right combination,
it's different for everybody's car.
In the middle you have a white Hex-Logic pad.
This is what you move on to
after you're doing your multi-step correction
using with V38.
This is going to remove any kind of holograms,
any kind of hazing, and again
it's gonna give you that really jeweled, high shine.
And lastly you have a black Hex-Logic pad
which you can use to apply your glazes, sealants, or waxes
using your TORQ15DA.
It applies a very fine coat so one,
you're using less product, you're covering more surface
area,
but again it's gonna save you time and effort
with a very fine buff-off, give you again the best shine
and also using the least amount of product.
So now without further to-do we're gonna open up the box
and show you guys what we have going on
inside of this brand new TORQ15DA.
Pull back on the flap here.
On top here you have your instruction,
your owner's manual, as well as a couple extra brushes
for your machine.
This is a handle which helps you get more control
which also is gonna help you put down more pressure
so you can work on flat panels
or more of an angular panel on the side of the vehicle.
And then you also have the Allen key here
which helps you remove the backing plate
because this machine is capable
of using a five or six-inch backing plate
so it comes standard with the five inch
which is easier to control but it's the best balance
between coverage as well as cutting power.
Now we'll take out the machine.
Now we'll begin by removing this protective dust shield,
keeps any kind of dirt or any kind of cardboard fragments
from getting inside of the machine.
And now right off the bat
you can see that this machine looks comparably different
from all the other TORQs
and that's because of this 15-millimeter bell housing.
This is standard with the machine
but again you can change it over to a six inch.
I know a lot of you guys have been wondering
if you can actually use a three inch, but actually no.
It's only designed for a five and a six-inch backing plate.
But as you see, it's got the hook-and-loop design
which is perfect for your Hex-Logic
or any other kind of pad.
But you can also use this with a carpet brush attachment.
This way if you wanna scrub really deep set-in stains
you can do it with your TORQ machine.
Then moving down you see we have the standard TORQ design,
ergonomic, nice and easy to use.
Rubberized grip up here which reduces fatigue
and also it's triggerless
so you're not constantly straining your hand
trying to keep up a certain speed.
But again, all you have to do is simply turn the machine on
and set the speed and then watch the analog screen
to keep a precise, precision accurate reading
of what you're actually using it for.
So this machine is perfect
for using any kind of compound or polish
or even applying a fine coat of glaze, sealant, or wax.
This is going to reduce any kind of user fatigue,
it's going to do it very quickly and very efficiently.
It's got a 900-watt motor so it's going to be very powerful
which is going to help you from bogging
or stalling the pads on curves or hard to reach areas.
I showed you guys recently on a Porsche
which has a lot of bubbles and a lot of curves
and this machine simply powers right over it
without being too aggressive
where it can actually harm the paint.
So if you guys want to know more about this product
head on over to our website chemicalguys.com.
If you like this video be sure to give it a thumbs up
and as always, we'll see you guys next time
right here in the Detail Garage.