Let Garmin share some important information about your dēzl™ Headset 200
Your dēzl™ Headset 200 includes your dēzl™ Headset,
a USB-C charging cable, a removeable earcup, 3.5 millimeter audio cable and storage hook
First, let’s go over charging your headset
Plug the small end of the USB-C cable into the USB-C port to charge the headset
Plug the large end of the USB-C cable into a power source,
such as a USB wall charger or a computer USB port
The status LED flashes green while charging
The status LED is solid green when charging is complete
Once fully charged, the headset will have up to 50 hours of Bluetooth® talk
time or up to 25 hours of media play time with active noise cancellation enabled
Hold the power button to turn on the headset
A tone will play and the power LED will light up
Now, let’s go over the microphone boom, buttons and cables
The dēzl™ Headset 200 microphone boom can be moved to the vertical position to mute the microphone
The headset will play a tone confirming it is muted
Move the microphone boom left or right to enable the microphone and change the headset orientation
The headset will play a tone confirming the microphone is active
The Bluetooth® button is used to put the headset into pairing mode
This is required to connect with a compatible smartphone and the dēzl™ app
Check out our pairing videos for instructions
Press the ANC button to enable or disable active noise cancellation
A tone will play when activating this feature
A separate tone will play when disabling this feature
Active noise cancellation provides the optimal listening experience when streaming music,
podcasts and calls
You can use the rocker to control the headset volume, music playback and phone calls
The OK Garmin button is used to activate voice assistant features
The 3.5 millimeter audio cable can be plugged into
the 3.5 millimeter audio jack to connect to another audio source
Active noise cancellation cannot be used with this cable
Now, let’s talk about adding and removing the second earcup
The dēzl™ Headset 200 converts from a single-ear headset to full stereo headphones for breaks
Insert the second earcup into the open end of the headset
You will hear a click when it locks into place
You can remove the second earcup from the stereo headset to keep one ear open while you drive
Press and hold the earcup release button
Then, pull the earcup off the headset
Next, let’s go over the media controls
Move the rocker up or down to increase or decrease the volume
Hold the rocker up to play the next audio track
Hold the rocker down to play the previous audio track
Press the rocker to play, pause or resume audio playback
You can also press the rocker to answer incoming phone calls from your paired compatible smartphone
and switch to a second active call
To end a call, simply press the rocker
Now, we will talk about the voice assistant features
Press the Garmin button to activate OK Garmin voice commands with a dēzl™ OTR device
Check out our videos on using the dēzl™ Headset with a dēzl™ OTR device for instructions
Hold the Garmin button for 3 seconds to activate the voice assistant on your compatible smartphone
The phone’s voice assistant will activate and receive voice commands from the headset
Finally, let’s cover how to utilize the included storage hook
The storage hook can be mounted to a surface using the adhesive pad
When choosing a location to mount the storage hook,
choose an area where the headset is not exposed to prolonged extreme temperatures
To prevent accidental damage, move the boom mic into an upright position,
then place the headset onto the storage hook
You can also use the integrated ear
cup compartment to stow the second ear cup when on-duty
And that’s it!
I know you will enjoy your new dēzl™ Headset 200 and hope you found this video helpful
For more important information about your dēzl™ Headset, please visit support.garmin.com
Thanks for watching!