This a 5" by 6" laboratory jaw crusher
That we are stocking now
Has a little hopper on top, you can see down the jaws
it has a little sample drawer there
its a batch machine, or laboratory machine or small scale production
This one has been retrofitted 5hp single phase motor
220 volt
a couple of samples we are going to run here
there is some
main material there and here is some
quartz sample we are going to run through
it crushes down to about 3/8 minus, 1/4" minus
and than you can open up the jaw gap to
about 1/2 inch
Here are those quartz samples
going to run those through now
and there is your finished product
okay, I adjusted the jaw gap here
to little over an inch, inch and a half
Just to show the different in discharge size you can get out of the 5" x 6"
and here is the discharge size at about an inch and a half
Quite a bit larger you can do a wide range of discharge sizes
the maintenance on these jaw crushers is quite simple, there
is three grease fittings
everyday or so you give them a pump of grease
just get a little bead coming out between the shaft and the bearing housing
this is a hand adjustment for the jaw gap
it's spinning about 400 RPM
these smaller labortary scale machines
spin a little bit faster than the larger machines
this machine will do
3, 4 hundred pounds an hour
maybe a little bit more if the jaw gap is opened up some
they are great lttle machines
We stock all the spare parts
replacement parts for them
If you interested please give us a call or an email
All that information is in the description below.
Thanks!