Hi, guys; Kirk and Jason are here With Kirk Giordano plastering,
today I want to show you how we're gonna do three coats over this very window and yeah
that's what's under this black paper here you can do a couple coach guys do something you wanna keep
in mind the weather right now it is mighty hot by the way guys I've been on a little holiday
in England visiting my girl's parents. first, day back today skip my balance back but none
some really that's okay because it's so hot like today is I'd say mmm 95 degrees, that's funny we got here
about two hours ago. now stick it why they have a swimming pool next door never gets hot here
well just prove me wrong anyway if you're doing what we're doing in two coats same day you gotta
count for the weather like it's real hot right right now it's about 95 we have to put water on
this board before before we put cement on this board otherwise this board sucks it all out just
like it already did now there's a lot of to coat materials out there these days guys via ma has
690 Eisenwald rapidset has their products that they sell to us professionals such as eyes and
wall and to not homeowners we go to Home Depot or Lowe's they have what is called rapid set what's
the difference between the two rapid step has the sand in it and eyes and wall but we use sometimes
to you have to add your own sand okay I mean I'm actually making a corner here because this was
a little shy that's not a big deal this is a good job to get me warmed up again I haven't done this
in about three weeks but it's kind of sad - bye guys never forget how to do it once you do it
right here I'm making the corner at the very top because and I'm just going to use my plow this
cha right here which by the way I just straight now come back from a little itty bitty holiday
and it was crooked as a dog's hind leg which means somebody been abusing it that's my favorite route
but I know how to fix these I tap them on the sides and make them straight true and plumb again
and they're usable okay finish this corner here about a week ago a fella called me says hey , Kirk
where can i buy a Darby and I said well my Darby, I said go to the left side or go
online and just hit Darby, and whatever site comes up, purchase it, so what you're doing is
this a window. I thought, well why do you need a Darby says, well, I see you using it all the time,
guys that Darby is already used in big walls and generally forgetting everything true and
plumb on a big wall this little stuff here I'm not gonna use the Darby. He was going to use it
for six inches around it it does make it easier, but if you haven't worked with the Darby before,
it's harder to learn how to use it than to just put it on with a Hawking trial,
by the way - one thing about this area here there's Bella email and uh Wow.
Looks like a cool place to work. Take a peek over here. Loo, get out of the way,
boy, on the picture anyway. I kind of think it's pretty cool to work in an area of this.
It's right on the lagoon we occasionally get that all right guys I'm finishing up this right here,
and then what I'm gonna do is I'm gonna let this sit for about oh man this shows you this mighty
stiff stuff that's got to go on immediately guys I'm gonna let this sit for about in this weather.
15 minutes we're gonna do other things I'm gonna come back to it and we're gonna do a color code
see this can you zoom in no what kind of finish that is that is called 2030 you got three kinds
of sand you've got in your finished coach you've got your Santa Barbara which is 30 30 you got your
20 30 which is medium then you got your heavy which is 16 20 honestly the lower the number
the heavier the grit so after this sets a little bit I'm gonna take this that's a hard rubber float
guys I just came back from England I was watching some fellas out there plastic and they were using
a heart or a hard plastic float hard plastic works just like a hard rubber what you do is well I'll
show you what you do when you come when I come back to this or maybe I'll show you now okay what
you do is you compress it you go in circles and as you as you go in circles this compresses and
you straighten it out and yeah hard rubber float works just as well as a hard plastic float but if
you wait if I wait another 10 minutes right here this is gonna be so much easier to load because
right now it's somewhat wet anyway we're going to go off and I'm gonna use a bunch of mud I'm gonna
come back to this and show you how we apply that particular texture that I'm talking about because
even I cannot match it with this I come close but can't match it so let me get busy use this mud
we'll get back to you okay guys finally back over here two kinds of actually there's a lot of size
floats you can use guys I go with the bigger one myself makes life a little easier get your wall
just compresses in two and plumb and everything compacted come back with a sponge float green
sponge float put a little bit water get these joints right here a little bit of water in these
joints it makes them feather end a lot better that way when your textures into something like this
it looks better okay we jump ahead to our color coat material we just mixed some 20:30 in a bucket
and what I'm gonna do is get the bulk because this trial is too big to fit in some hair and
stuff I'll get you guys if you would have seen us earlier finish it the rest of the mud my brother
he just gave us some really stiff mud,
so we had to hustle to use it all with this same day material is no joke,
guys you use it since I didn't want to lose all that material we hustled like a cartoon character,
and fast motion it put it on so you guys tell a man I mixed it, and it came out stiff
And still, have good and bad days. What we're doing now is just texturing,
and since my trial here is just a bit too big to go there, I'll pull up my handy-dandy congo
trowel. The rest of this texture on what I'm doing guys this is are thousands of different
textures there are only usually about three different sands with the fine medium coarse,
so I'm looking at their texture. Whether or not if I Pachelbel really heavy or kind of like this
I may not be able to do plumbing but I okay so now we got it off we knock it down knock it down and
make it I look at what they have, and that's all I'm trying to match God look at what they
have and match that guy so when this is painted it won't look as bad as the last guy it didn't
look I just got pulled over to there out of the mud I'm gonna take some mud here guys I'm gonna
need a little bit a scoop in a bucket the best way to do it don't need a board and stand for
this hustling it is hot when I say hot how about 95 but we're I'm in the shade okay all right.
And I'm gonna finish this off. Guy's this doesn't matter the skip trowel is a pretty simple texture to match.
It's like a pancake what they have here makes my job okay see you guys on the next one once again,
folks. We thank you for watching, and I really enjoy all your comments. If you guys like this
video, please click the like button down below, and also, if you enjoy what we do,
subscribe to our channel so we can keep making these videos for you. My name is Kirk and Jayson.
We thank you for watching, and the entire Giordano family will see you at the next one.