Hello, assalamualaikum warahmatullah barakatuh, see you again with Black Builder ID OK, this time I will share a little tutorial about the technique of
finishing souqi band, namely the
Japanese grilling technique.
The steps are also in
the video after this and this is Dutch teak, how do I burn it first then
I brush the wire and I sand it with 240 and I use the top layer curd,
Hi, it's yellow oxide, and after that I coat it with a gloss top coat.
the steps are as follows, yes, here I tried the Dutch teak wood media, where
on the other side I will putty, so here I am experimenting. Eh, before that I
putty and putty, I spent first with the sanding machine, here I use
the sanding machine or the dregs paper Bridge 120 so that the wood filler layer runs out and I do
amplification Weld the entire surface of the Dutch teak wood which we will give the finishing souqi Band,
hi, hi, hi, after the lu filler layer is finished, we first clean it
from the remnants of putty and we prepare the tools here I use Thor's and
for fuel use Hi cook gas and for the application here, friends
, can be thin or thick or burn all areas of the wood
, but in this experiment I tried moderate, so it's not too dark, it's not
too black, it's just mediocre, I burn almost the entire surface of the wood
, so I guess -just according to taste and when it's enough, friends, you can
directly rub it with a wire brush, yes, after the results are burned, it's according to your wishes.
Hey, it's crazy, be careful with ghost touch, okay, here we brush first with a
wire brush all over surface to remove the remaining Charcoal adhering to the surface of the wood
Hi and after we clean whew, and we clean it, we wipe it first, after that,
here I am sanding it with grade 400 sandpaper. Why because I want the media that
we will give the Stein and clear coat layers to be smoother, so I use Grid 400
, friends, you can also use sandpaper Grade 3 20/2 40 So it depends on how
the finishing goal is, friends, and here we can see that the traces of the rest of the filler are
still visible, yes and for the coloring, I used biovarnish, the color is yellow oxide
with a water ratio of 2 to 1 and for the application I did 2-3 times I happened
to do this three times, as usual, yes, for the application of biovarnish, the
quota is hi, it's applied to the entire surface of the wood, then we wait for it to dry for about
an hour and after that we drench it with 400 then we give it a second layer and
this step we repeat until the resulting color matches our wishes hi hi hi
bang et hi hi hi really
hi my friend Yes, the sanding process for the next layer is safe, do it
on a threshold and clean it for the remnants of the dregs and we will apply it to the next booth
hi hi hi here friends you can use a different website color, depends on your taste
But because I want to show the effect of ancient Kuningan I use Gill oxide
hi hi
Hai and for the third layer of woodstain uh I wait for it to dry because
I want to coat the topcort or clear coat with a gloss but
before we apply our clear gloss sand it first and we apply the clear coat to
the entire surface of the wood and for comparison to the clear coat I use here it's
about 2 to 1 and for the application here I applied the clear coat
twice but for the second process I didn't show it hopefully this video
useful and if there is a technical error, please criticize and comment advice in the comments column
hi hi hi in the process of applying the glo clear coat here, I did the comparison 2 to
1 yes with water and I'm still using the Sponge brush here I use
a little clear chord because I did the application twice as usual, eh
using the clearcoat after we apply it to the entire surface of the workpiece, we
wait for it to dry for about an hour and after that we can see the results and if
it is still not enough for a clear coat, maybe you can apply
more than two times, yes, until you get the best results, according to friends.
Oh yes, it was fun, that was the event I applied finishing with the burning technique and for
the tools used, Force, with gas highlights. And the result is like this
. Hey, I gave the one on the other side a thumbs up and I didn't give a thumbs up on the
other side I gave full putty and as much as I want to give Gembul to the holes of the
pack and the result after it was burned, a little appeared like this
Hi and it looks like putty marks, yes. And maybe a friend has his own technique, yes, and for
what's asking, I asked about twice, yes, and for the gloss, I did about twice as well
and I think the result is from the technique This grilled finishing is artistically beautiful and usually
in Japan it uses Cedar wood. However, because in Indonesia it is very difficult to
find Cedar wood, so I use Dutch teak wood
. the application should
be banned Thank you for watching my video don't forget to subscribe like and share and turn on
the bell so you don't miss the next video from us see you on
hi hi