What's up guys welcome back to the Detail Garage.
Today I've got my buddies Harley in the shop because it has this haze, scratches and water
spots on the chrome.
One of the trademarks of all Harley's is the bright luster of the chrome.
Today I'm going to bring back the brilliant shine using Chemical Guys Moto Metal Polish.
It's a cleaner and protectant for your chrome pieces specifically for motorcycles.
All you have to do is shake it up to mix it all together.
Take an applicator and I'll apply a few drops because it is small areas that I'll be working on.
Then work it into the area starting with the intake cover.
This is taking off all the haze or build up that's on it and removing the water spots
to leave behind a high shine and durable protection.
After working it in I'll take a clean microfiber towel and wipe it off.
This way it will unveil the high shine.
It's already made a big difference from how it looked just a few minutes ago.
Now I want to start cleaning the cylinder heads because they have some grime, water
spots and it looks like someone wiped a quick detail spray on leaving streaks behind.
This polish is safe for any type of metal work like chrome, aluminum, polished metal
and stainless but I'm focusing mainly on the chrome because this is bike is covered in it.
Again using my applicator just working the polish in and it will start hazing up and
that's how it works into the surface and I'll wipe that excess off.
So moving right along I'm going to start polishing these chrome exhaust pipes.
It also has a little bit of a haze on it which is typical because as these heat up and things
land on it the debris will cake on there making it difficult to take it off.
Using this metal polish it is super easy to clean it off and give it a nice high shine.
I'm only applying a very little bit to this applicator because not only am I working on
a small area but also this product stretches a long way so I only need a little bit to
do a large area.
Working back and forth this is taking off the grime and debris, water spots and contaminants
to bring back the high shine and then I'll wipe off the excess to unveil the finished
product and also the protection which will protect it from water spots and debris from
dulling out the finish.
Now using my clean microfiber towel I'll wipe it off.
The polish has taken care of that haze and all the contaminants that landed on it are
all gone all that's left is a high shine.
I've already taken care of most of the chrome on the other side and now I've moved to this side.
Starting off with this foot peg this is something that gets abused because it is something that
typically not gently put down by hand it is kicked with their shoe and it gets scuffed
up and it gets dirty which dulls it out so I'll start by cleaning that and polishing
it using the metal polish.
Same application style, work it into the area back and forth.
It is taking off all the haze and boot prints.
it is going to protect it and give it a high shine as well.
While I'm down here I'm also going to take care of this belt drive cover.
This is also something that gets a little abuse because it's down here by your boots
and when you're shifting gears your boot will scuff this up.
As I'm buffing it off I can see a night and day difference from how it looked earlier
and now it has a high shine which has a lot of reflection.
Damn I look good and this bike is looking pretty good too.
So guys you see how easy it is to get dramatic results.
If you like this product check it out on our website ChemicalGuys.com.
If you liked this video be sure to give it a thumbs up.
Also don't forget to subscribe.
We'll see you next time, thanks for watching.