Hey everyone! I'm going to show you how to build a light duty pickup truck that is scaled
for minifigures for today's LEGO brick tutorial. Let's start with the chassis with a 2 by 10 plate.
Let's take a 2 by 2 plate with bearing. Set this on the right-hand side followed by a
4 by 4 plate with a 2 by 2 cutout. Set that right here, and a 2 by 2 plate with bearing,
1 by 4 plate, and a pair of 1 by 2 plates with slide. This is going to be our rear bumper.
On top of the plates, let's set down a 1 by 2 plate to secure
everything together. Then we're going to proceed on with a pair of 2 by 2 plates.
On our 4 by 4 plate with cutout, set down a set of 1 by 4 plates,
and in this area, a 2 by 2 plate right on top of the 2 by 2 plate with bearing. For mud guards,
take a modified 2 by 4 by 2/3 plate. Set this right here, and we're going to set
a pair of 1 by 2 plates right on top of one another on this side of the mud guard plate.
A 1 by 2 steering wheel console right there followed by a 1 by 4 brick, a 2 by 4 by 2/3
mud guard plate, and a 1 by 2 flat tile right in this area then let's surround that with a pair
of one by one bricks let's focus on the back start with a 1 by 2 by 1
wall element place that right back here this is going to be like our fake tailgate and for rear
brake lights take a 1 by 1 angler headlight brick we're going to set a transparent red
1 by 1 flat tile on the face we're gonna make two of these we're gonna set these
in the two remaining areas and let's flatten these two areas off with a pair of 1 by 4
flat tiles now you're going to have to leave these studs in here this is the only way to
give ourselves a little bit more clearance for the cargo area and for doors a set of
1 by 3 by 1 doors both left and right hand sides now let's turn our attention to the
front bumper and grill let's take a 1 by 2 by 1 by 2 downwards angler plate we're going to set that
right there take an upwards 1 by 2 by 1 by 2 angler plate we're going to set a
radiator grille right inside we're going to place this right on the downwards angular
plate and let's secure that with a 2x4 flat tile for headlights we're gonna take a set
of one by one angular headlight bricks place a transparent clear one by one flat tile on the face
we're gonna make two of these and we're going to set these in these two corners right here
and we're going to lock all that together with a 1 by 4 flat tile
this is going to be the front bumper so this will secure everything in place
now let's put some side mirrors on our little pickup so i'm going to take one of these 1 by
1 plates with lamp holder and a half round 1 by 1 flat tile place the square portion of the flat
tile where it's next to the stud we're going to set this one right here in this area we're going
to make another one of these again with another lamp holder and a half round 1 by 1 flat tile
set that right in there make sure everything is straight place that right down in there
now take a 1 by 2 by 2 transparent clear wall element place this right in the back
this is going to double up as a rear window as well as for head room for a minifigure
and for the side supports take a pair of 1 by 1 bricks place these on top of one
another let's make two of these and put these on both sides of the wall element
and a 2 by 4 by 2 windscreen
i want to keep the top simple so i'm going to place a pair of 2 by 4 flat tiles
for the top of the cab now for tires i'm going to take some of these small
tires and a small rim set the rim inside the tire we're going to need to make four of these
and we're going to place these on the bearing plates
so we're obviously going to need four tires for this to be drivable set those right on in there
there's our small lightweight pickup truck