good morning this is my wifes sewing table and that is her new well I would I
get it I thank God for a birthday maybe it was Christmas I can't remember
anyway this machine does not fit down in this table I I built this hold on I'll
get a chair I built this a little pocket to drop her sewing machine down hold on
and what it does is make the surface of this level with this for some reason
that just makes it more convenient for some probably going to have to lower
this down another half inch because this appears to be higher than her other one
so I think I've got this one is flush the front side and that I've got about
3/4 of an inch to that bracket and I think I can just miss this and make
enough room and then I got to cut about 1/4 inch of length off of it and set it
down there and see where the table or the height of it rests and if it's too
high I'll have to drop this and what I've got is some spacers on the base
that I can just add more spacers and drop it down and I'm going to widen it
with my saw there well I had to remove the leg bracket that came up through
here and pulled it up under here because it was in the way but I'm going to screw
it back on to the back side of this whenever I find out what level I need to
put that at so I got a cut let me try it on here
okay now no I can't pick you up right now
you gotta boogers yeah we get nature get net you go on get a grip get it come on
ready no but I can't hold you you're on your
own all right let me see how high how low I
got to drop that table
I'm gonna have to use both hands to do this but you get the idea I'm going to
measure the gap between here and here and that's how much lower I got to lower
this just before you start okay I'm already started okay whoa I guess it
worked and just fine ah that's pretty level enough is it well I can I can
lower it where this is level but the curve will be below the edge of this but
whatever you know whatever works for you all I'm going to do is I have spacers
that hold on the plate that hold this up all I want to do is take those spacers
out and put bigger spacers in or you know if you want to try that and this is
something I could do in your sewing room just unscrew the screws put bigger
spaces in and and you know if you want to try this and then see if you want to
lowered this will work but if you want to lower this here to the table okay
that would be fine with me but I can make this work
okay well I'll lower it to the table line and then that would make this even
way lower so I don't you know and you're only talking what yeah yeah that's about
all I was going to drop it down was another half you okay
this'll work but all right well I'll put a bigger spacer in there drop it down
love you bye I decided to go ahead and drop it it's
easier to do it out here so when I've got four spacers I'm just using nuts and
I've got one I measured and it's a quarter-inch wide and I don't want to
drop this another half-inch so I'm going to cut these at 3/4 of an inch put a
washer on either end get some longer screws and just put this back together
so let me get that done
all right you got my washers and these are 2-inch screws so I'm going to
replace them with the two and a half inch screws no I'm going to use three
inch screws and yeah I saved screws we'll be back on you know I get to sit
up with spacers and show you what I got that's what's going to look like now I
need to flip this over with all three of my hands and hold this together let's
see if I can do it here we go now I need to this bracket that I had to remove now
I gotta get the legs square drill a hole in that and secure it to that just so
the leg don't flop around Oh ready that's my next thing drill the hole
screw that screw that down and then I'll turn it over and fit the sewing machine
okay okay alrighty then cuz if it's not told me
now I can warm up my morning bed well I'm the kind of guy that needs to hear
that like several times you know I like a praise whore