hey guys rolando from revemoto and today i'm going to be doing a 2014-2019 chevrolet impala
front bumper removal if you guys like this video go ahead and like subscribe and turn on that push
notification if you guys need any pre-painted auto body parts for your car, go to redmond.com
your pre-painted automatic part source so let's get started first thing we'll do is go ahead and
uh pop open the hood all right so now we're gonna go ahead and take off these push pins right here
it's all around the uh front bumper and on the top section let's grab a flat head right here
and we're gonna go ahead and take off the ones on top over there
all the way through to the bottom and then we'll work our way to the other side
so all you do on this one is
this focus right there and go ahead and wedge it right there and then pop it up
and it should pop open like that then you can remove it all right so now if you look alongside
the top of the bumper you're going to see these uh bolts right here they're going to be t20 torx
right there and they go all around the top of the front bumper
all right so the next step is removing the bolt behind this fender right here so i'll
get you guys a little bit closer so if you guys can see right back there that's the ball you're
trying to get into so you're gonna have to get an extension so that's gonna be a number 10mm
okay
and you're going to need an extension just like this one and i'll show you guys where to put that
and that bolt looks like that
all right so on this one right here you're gonna have these bolts that's also a torx bit 20 i
believe that goes along the fender liner this one's kind of damaged but anyways there's still
uh bolts right here that take off so i'm gonna turn the wheel that way and then i'm gonna go
ahead and remove those bolts push the fender liner back and then there's gonna be a bolt like
kind of showing right now but that ball right there that's gonna be a seven millimeter
so it's kind of hard to see but these bolts are like right there two three four
there you go and then these bolts look like this there's usually like one two
three four four of them and then underneath too so if you guys look right here there's a
bolt right there but it's usually like pushed up and it's underneath it's gonna be a seven
usually you go ahead and move the fender liner to the side
and then you go inside from here but mine is exposed so i'm just going to take it off like
this
okay that's how that both looks like that's going to be right here mine was already showing
but it's usually underneath right here so move remove move the fender liner back
all right if the if the car's too low for you guys go ahead and jack it up on each side
and then lift up the car because underneath we're going to take
off these bolts so let me show you guys what those things look like
so basically where the fender liners is also attached to the bottom this is going to be i
believe seven millimeters right here so you're gonna one two three four five on each side then
same thing on this side same seven millimeters then i believe
this thing is being held up all right so we're gonna take off those bolts over there
i'm gonna start off right here actually we don't need to take this off and start off right here
all along
so skip one and go to the next one
all right that should be right off
oh actually
if you guys look over
right underneath here there's another bolt so you're gonna take that off right next to the uh
that's gonna be a seven
so
so right so now the bumper's a little bit looser i'm gonna do that on the other side
so remember skip every other bolt all you're trying to do
is get the bolts off of the black fender liner
so so on this one the fender liner's all broken up so you won't be able to
see it but take off all those bolts that's connecting the fender liner to the bumper
so if you guys look in the middle of the bumper you're gonna see this uh this piece right here
there's gonna be holes like right here uh over here and over there you basically this one doesn't
have it but it's just push pins the same way you took off the push pins on the top just get a uh
fly head and pry it down and it should unclip itself and then it should start dangling like this
okay so once it's dangled like that we're gonna go ahead and start taking it off
all right so once you guys remove the uh bolts underneath the fender liner so remember just
the bolts that's uh connecting the black fender liner to the underneath the bumper
take that off also on the other side take that off underneath right here in the middle
right here you saw the colored piece the silver color piece that's like part of the
bumper just take off those uh push pins okay so once those are all off pull them from each side
slowly because remember you still have those fog like this one doesn't have it but
there's a fog light right there that you got to take off that uh wire to okay
all right so that bumper just fell down but basically
right there is actually where the clip is so good for us it
was already unclipped like i said during the accident something happened that unclip that
little uh bumper right there or that fog light so basically it's that one harness right here
oh so you guys have to be careful it's like actually right here
so if you guys notice that clip is like right here so you have very little room
so once that uh bumper comes so i guess you got to start from the side right here
and kind of push this out out to the side and then kind of grab your finger and try
to unhook it from right there if you guys like this video go ahead and give us a
like and also comment down below with any questions you guys have if you guys need
any prepaid auto body parts go to revmoto.com your pre-painted autobody part source thank you