This is a little bit of a bummer, but I kind of knew it was gonna happen
But we're down here at Madison ditch you guys done the spot?
This is where we came down and built this entire quarter. We built the entire thing
We've got all of our names right here and somebody did this that was rude so he came down to repeat the whole thing
We're like I said, I knew that was gonna happen
I kind of wanted to be the person to do it but it is what it is
We can always paint over it or pressure-wash it whatever regardless we made that bill stoked on it. It's working just fine
No problems whatsoever. Thus far so job. Well done, boys. We're also down here with our G
We've been kind of cruising throughout the entire day. We went over to Kelly Oakes as well
Had a good time over there a great session
But I want to get a few clips on this small corner really quick our g-code there. What's up freakin below?
Just freak out. Oh, no, bro
Oh, no, I've seen freakin recipes, but let's get a few Clips really quick with the helmet cam
All right, so we got these scoop right now and Ryan's over here looks like he's gonna do a little stall
I'm actually really excited because the quarter pipe is not getting destroyed when we're actually stalling the top
So that's a massive massive. Good sign
let's drop it really quick and get a little like kind of gap over onto the bank in JPEG n
And I both absolutely terrible quarter they decide that we need to redo
I know. I know you guys all said please redo these quarters
It's freaking expensive and it takes a lot of time and a lot of help
So I want that little stall thing again, but I want to do a bar spin out to it this time
You know five bucks you Flair this quarter
five bucks
All right, Jamba oh you
Okay, let me I want you motherboard thing
I'm going to show you guys the severity of this Flair that Ryan's trying right now drop it in up for there we go
oh my
Freakin gosh, yeah, just look a look at the look on Ryan's face after that one. That was not freaking good
I did I did that earlier you guys I almost died. So this is a quarter
This is what Ryan put your wheel up there really?
Okay, no
Freaking gnarly. This is can Ryan flare it. I'll try to do it right after you two
It's not gonna work very well, but we'll try. Oh
Dude, I can hear you rolling up to it
Oh
No, I like I don't think anyone is like flared this one before I think every time we've ever come here
We've just flared this one previous to us redoing it to me like okay, that's enough. We're done actually wasn't that bad?
No, like if you go up like here
And you just go fast
Yeah, what's right?
Then I was like, oh like that. Yeah, that's that's
It's got bad news bears written all over yo
I want to know it's like whoever came down here and just spray painted piss will do that says patient chug piss jug
Brian just made a good point. I have 120s my rides 110, so I might be a little bit better off
But regardless, it doesn't mean that this is smooth
Whatsoever. All right right there. That's my spot. And if I go any further to the right, yeah, I'm gonna freakin die
Okay
It's so frickin bad you I'm not dang it. I almost had it first go hearing a second go with RG
That's nasty what do you think
There's a close one if you if you ain't in that pink, oh, yeah, this is this really slippery
That's my thing Bob right here. We should might be. Okay. I mean, that's a good trim this part
Let me just roll up to it really quick. Where's the line? I guess you drop it in right here
one of these you can drop in on this because before you
Couldn't drop in on us to hit that you'd have to go
We gotta go from over here to hit that well, try this out first then
Well, oh yeah, we know that was gonna be easier
Brian's ion channel much we've explained full Senedd to him, but we haven't demonstrated it boy. I suppose that
Well, that wasn't bad at all I was wasting with it
Yo yours was so cool, how do you flare like that? You literally had the best players
Yeah, but I don't care it was still really cool
round two
Yo B your flares are so much better-looking than mine mine I like flips yours are like dip 5 almost that's a player
You you don't like bikers do it on the mega. Yes
Yeah, but John campfire
Please just clarify that John. I Love You Man. You're my boy. We're teammates
You cannot flare and you he knows he can't cuz every time I say he never defends himself. He's like, yeah, that's it
I mean he can do them to Manny nearly every shot. That's gnarly but there is e rules
I don't think I've ever called it play
Yeah your hats in trouble good thing you didn't land in the poop we have more dukey's down here ladies gentlemen, that's a Dookie
That's a Dookie. Those are 2 Dookie chunker's that's a Dookie
That's a Dookie. That's a cheeseburger. That's no up
Oops
I
Broke this wicked ramp a little bit
Like I could pull this entire thing out right now
But I don't want to say I can move around a little something you guys like. It's on camera, but
Whoa, see I told you it's accident
I
Learned it directly on that
Dang it, I didn't mean to I just wanted to do a flare
Well, my ass induces a ruined a little bit more now. He'll look at this dude. Oh my god
So as you guys saw in that last clip RJ and I are trying to be like a side by side flare where he flows
This one eye flare this one, but let's try it again second go
So I just landed in this little hole like this and somehow like think thankfully the rest of my scooter was on the outside
So they like kind of ride it out, but I did not mean to do this
But I already had the entire issue over here, so I don't feel so bad about it
But one of these days we do want to redo these quarters
Anyway, this one's actually a lot of fun, which is cool
but people come here and they write and they fall and they get hurt which is
What all this is about and that's why we want to come down and redo it just because I don't want anybody to come down
Here to come and have a good time and not have a good time and end up going to the hospital
So one day one day. Hey Siri, Temecula quality plating. I found one option Temecula quality
We're gonna give these guys a call really quick to see if they can do like one-off pieces when it comes to anodizing for the
$10.00 and miss cute. I still have to do the clamp possibly the fork, but I don't think we have to do the fork
Definitely the deck so those are the three pieces that we need to get done
So I need to call find out if they can do just single pieces because I don't want have to do five or six
Different decks, obviously, I don't know if they're gonna be able to tell me the cost but we're gonna find out right now
How are you doing today doing great, I have a quick question for you
So I have a couple of pieces that need to be anodized
But I was calling to see if you guys do
Anodizing for just single pieces or do you have to have like a number of them?
Awesome, what was your name?
Vanessa thank you very much Vanessa, and I'll stop by they're here within the next couple of days show
You guys what I have we'll talk about pricing or whatever
Awesome thank you - I have a good day. All right, that's a good sign. That's awesome
That means that we might be able to get all of these things powder powder-coated anodized for a decent price
So it's trying to keep it under 100 bucks
I know it sounds like really really expensive - a lot of you guys but when you actually understand the process of
Anodizing and what actually goes into it? It's actually a pretty decent price for doing
Like I said just three pieces if I had like 30, it might be a different situation
But I only have three so the three pieces that we need to get done are the fork
We don't have to do the headset
But I'm gonna see what kind of cost it would be
If I were to get the fork redone
When they do though because it's like a dip process and when they do that, it's electrically charged and things like that
So it gets throughout the entire fork went to school
So we want to worry about the inside that's already done with the process and we also have the deck now
Here's the only problem with doing the deck. We have all of this stuff on the bottom
All this stuff is like an etched in it's not just like a big sticker. I'm not gonna be able to redo this
unfortunately, I'm gonna have to take a photo of this recreate it on Photoshop print it out to the exact same size and then just
Stick it on there
This scooter is not gonna be ridden regardless, but it would be incomplete if I had the scooter re anodized
I had it all like greened in the correct green which is like this darker color on the inside of the head tube as opposed
To it's like faded green and it didn't have the actual graphic on the bottom of the deck. It wouldn't be complete
So we had to get the deck done and the last piece I currently cannot find, but I know it's in here
It's in here somewhere. But the last piece that we have to get reanalyzed is the clamp
The clamp is like a pink right now, but I'm not sure if it came pink
I'm pretty sure that was supposed to be purple
But maybe it was just faded or maybe that one really did come in pink and the person that built the scooter
Just wanted a pink clamp. I don't know
But if I were to redo that clamp
I think I would redo it in purple as long as and we did make them in purple back in the day
I have to double-check but being that they made the fork in purple as well as wheels in purple
I would imagine that they made those clamps in purple as well
And the same thing goes to the clamp that goes for the deck
there is a
Design on the front of that clamp that we have to recreate in
Photoshop get it printed out in an actual sticker like a die-cut sticker and put that on there
so unfortunately
I'm not gonna be able to keep the actual etching back done on the front of the clamp because that just that's
A lot of work and I don't want to screw anything up
I want to be perfect and I don't want to spend too much money on this build
I got the bars reap outer coated but huge shoutout to John rocky because he actually did this for free over at affinity
So thank you John
It's looking like I might have to buy wheels
Because I've been looking around online to see if I could even find any other for sale that are used or if anybody has them
That they're willing to donate. I mean, it doesn't look like it which is totally fine. I wasn't necessarily
Hoping for a donation as weird as that sounds I mean it would've been really cool
But if I buy them I could probably get some that are brand new
That is if I can find them and that's been the hardest part so far as finding wheels everything else that kind of figured was
Gonna be okay
But finding wheels is so far proven to be a real pain in the butt
Bearings are gonna be easy because they've used the same exact bearings forever in Envy wheels
And I already have some of those in my in my home grid tape
I have a whole bunch of super super old envy grip tape that we should be able to just slap on there and without cutting
It or anything like that, so it should fit on there just perfectly we have the headset. We have the brake
It's a brake we might get I don't know
If is this a node that is a node so we might end up getting that one a node two
Depending on what the bottom of the brake looks like. So that's a possibility grips grips. I have grips upstairs
Some old old Envy grips. They were just like the that envy try seeing logo
This thing is like a whole bunch room all over the entire
Grip, and I do just so happen to have green ones up there
I believe I'll have to double check but I'm pretty sure like 80%
Sure that I have some bright green ones which works perfectly because the scooter is a purple and green theme going to it
But all no I would say this build is going really really well so far
Surprising we will and it's going so well because I have a lot of extra parts
Like I said here at my house, and I have a lot of awesome friends that are willing to help out
But I will definitely be posting about this scooter pretty much until I finish up about it
if I had to guess is to say
How long we have after we first of all get everything re anodized and second of all fine wheels
we'll be able to put this thing together and it'll be
Essentially done and oh, I got to make all of the graphics and stuff. But after that we'll be finished
We'll be done. The scooter will be put together ready to go and hung up on my wall
maybe I will ride it just maybe just
Just maybe not a guarantee
Just maybe thank you guys so much for watching as always. Hope you guys enjoyed today's video
Make sure you guys subscribe if you don't all
And like this video if you enjoyed it huge hug to RG for coming out and ride with me
I had a great time running with him, but until next time I'm out of here later