Hello there, welcome here! Let's see together how to record vocals and sounds
with
Leave comments to improve our pronunciation.
Let's see how to
which is
audio
Let's suppose to record one or all the
choose which ones to record, simply turn off all channels you want to keep out.
Now open the
The
by the
Before recording, you can edit the output using the right side of the
effects or using
Check our
Just make sure to save at least one slot. To record the best, you need to add the
Edison window
used to add effects, but to edit and manage samples, and export them fast.
Recording is very easy. It right starts when you click on the
Edison window
through the columns on the right.
recording
the
You can then use the buttons above to adjust it. To
double-click to start selecting and drag on the left or right. Play often to check how it
sounds. You can enable
selected part. Then use your mouse wheel to
You will usually use this window just to cut parts of the waveform. This is the reason
why you don't need to be precise while recording. To
and then click on the
mistake you can use the
When the track is OK, you need to
click on the first icon and then go to
Otherwise, if this track must be used in your project, use the last button in the list.
This will export the whole waveform in the
as an aside pattern called
waveform if you saved it first. If you have any part selected, just this will be exported.
If you need to record a part of the
thing that differs is to be in
Mind that, for each new recording, you need to clear the waveform graph everytime.
The new recordings are put right after the old ones.
On top you have the
the record options right below the main graphs. However, the Edison way and
editing is much better and faster to use. Try using this button as well if you like.
Let's see how to record
or voices outside the computer.
ASIO
software with the computer sound card. You usually have it since it is included in
the FL11 setup. In case you don't have it, you can simply download and install it
for free searching
Before recording, you need to adjust the audio settings. Go to
to
to follow. If you have Windows, this will be
device from the list, for example
Now, observe the
source of the channel selected. Let's pick always the
it means that the input comes from FL Studio 11 only,
connect the computer to any microphone, this will be listed through the
ASIO device
comes from the FL Studio player and what from the microphone at the same time.
If you want to hear
player stopped.
The same works for
list. This chooses the
So to
and activate recording through the
finish click again on the record button. The voice will be shown as the recordings
seen so far and can be edited and exported then.
In similar ways you can import the sound from
remember to activate an
to the instrument. The edit and export process will be the same as seen.
Watch out when you are going to export after recording external audio.
remember to deactivate ASIO devices
ASIO devices will be used to export the track, that will result being
the default settings you had, choosing your main audio driver first.
Thanks for watching! Check our