Starting now your days of scooping are over.
In this video we'll help you set up your new Litter-Robot and get familiar with how it works.
First, let's check to make sure you have everything you need.
Instruction manual? Quick startup guide?
Plug and adapter? Fence?
And the Litter-Robot.
Your Litter-Robot will come with a carbon filter and a waste drawer liner pre-installed.
When deciding where to put your Litter-Robot there's a few things to keep in mind.
When picking up Litter-Robot 4, hold the back handle and the top front face of the unit.
Keep the unit indoors somewhere cool and dry.
You'll need a power outlet and a firm level surface.
If there's a rug or carpet involved,
make sure it's low pile and directly in front of or completely under Litter-Robot,
Place the unit at least one inch from the wall.
If possible, place Litter-Robot near the old litter box to help your cat acclimate.
Now, let's power on your Litter-Robot.
First, fill the globe with any clumping litter of your choice up to the max fill line.
Do not use wood, newspaper, or strictly absorbent litters.
Then, connect the power supply to the back of the unit and plug it into your nearest outlet.
Press the power button and Litter-Robot will
begin a cycle and you'll begin a life of never scooping again.
Now, let's get you onboarded to the Whisker app.
In order to set up the Whisker app to work with your Litter-Robot,
it requires the following things.
Pause now to read all requirements.
Make sure bluetooth is enabled on your device.
To start the onboarding process, put the Litter-Robot into setup mode.
Press and hold the connect button on the control panel for three seconds.
The control panel will turn solid blue with a yellow light on the bottom.
Next, open up the Whisker app. You will need to log in or register an account on the app.
You can do this using the email address and
password you created when purchasing your Litter-Robot from our website.
If you did not set up an email or password simply select register to create a login.
Once logged in, tap the plus button to add a new robot.
Select the Litter-Robot 4 icon to start the onboarding process.
Read more about acclimating your cat to Litter-Robot and confirm
the connect light is flashing yellow to continue.
Register your robot by scanning the QR code on the back of the
unit to link the serial number to your app. It's also located on the box it came in.
Next, it's time to name your Litter-Robot.
If you have more than one robot, this will make it easy to identify.
Now, connect your phone to the Litter-Robot via bluetooth.
Your last step is to select your home wifi network and enter your password.
Once the Litter-Robot is successfully connected to
your wi-fi and the process is complete, the control panel will show: solid blue.
Now, let's get familiar with how to use Litter-Robot.
Litter-Robot has five main elements:
the base, the bezel, the globe, the waste drawer, and the bonnet.
You'll find your control panel on the top right of the bezel surrounding the cat entry opening.
There are two types of button presses: a quick press and a long press.
These two types of presses will activate different features of your Litter-Robot.
Keep this in mind when using: many of these functions are also accessible through the
app and will be displayed on screen for your convenience.
Power will turn the unit on and off.
Cycle will run a normal cycle depositing any clumps into the waste drawer.
Press again to pause or resume. Hold cycle for three seconds to activate
sleep mode which stops the Litter-Robot from cycling for a full eight hours.
Reset when pressed in the home position will reset the cat sensors. Pressing
mid-cycle will pause the cycle. Press again to cancel the cycle
and return Litter-Robot to the starting position. Hold reset for 3 seconds to activate the lighting
settings which cycles between on, off, and auto. Use the app to adjust the light intensity.
Empty will remove all litter in the globe for easy disposal when it's time to clean the robot.
Hold the empty button to cycle through the wait time interval options.
These options allow you to choose how long Litter-Robot will wait to cycle after each use.
Connect will turn wi-fi on or off.
Hold for 3 seconds to start the onboarding process.
There is also a light bar below the control buttons to pay attention to.
Here you can see all the possible combinations and what they mean.
Now, some tips to make you and kitty's Litter-Robot experience even more enjoyable.
Leave the unit off at first to give kitty time to sniff, explore,
and acclimate themselves to their new litter box.
You'll know when it's time to empty when you see a flashing blue light.
You'll also get an app notification.
When Litter-Robot is full, simply pull out the waste drawer,
remove the bag, and replace it with a new one.
You can use our custom waste drawer liners or a regular trash bag works too.
If your cat weighs under three pounds, do not use automatic mode.
Check the instruction manual to learn how to best train smaller cats to use Litter-Robot safely.
While most cats acclimate to Litter-Robot within a week,
if you do have questions, Whisker support is here and ready to help however we can.
Want to upgrade your Litter-Robot experience? Subscribe to all of your litter box essentials
including: waste drawer liners, litter, odor trap, and more.
Get your must-have products delivered to your door when you need them. Just
select the amount and frequency and we'll take care of the rest.
The best part? No commitments.
Cancel, switch, or skip whenever.
That's it! We hope you
and your cat enjoy your new Litter-Robot. And the next time you think about scooping...
remember now, you don't have to.
Whisker, making life with your pet endlessly better.