Well, let's Vlog
today . What
we're actually talking about is my current one, which
is a
studio . We
have seen this
studio before when we unpacked it in the studio. We were planning it earlier.
At the time, I actually hoped that it
would be a studio where every wall could be used for shooting. You should have seen
this wall,
and maybe you have seen
this corner. This lift table
is the most commonly used by me so far,
because no matter what.
You're going to lift it out of the box or
when you're in the back and you can lower it when
you want to hide it
or
you can lift it up
when you
're probably going to put something on top
so I sometimes have this
The lift table is
sometimes
outside and sometimes inside, just to see my needs . You should have seen this side.
Sometimes it's the background when I
was shooting this corner. Then I'll turn it around,
so you may have a better impression. No, this
side, when I shoot that bulletin sometimes,
I'll shoot it in this corner,
you can see some light coming out
of it, and if you come back, the least you'll see is
the side behind me. This
side can be seen
right now. There are a lot of boxes below . I'll put them here first,
because there are actually some things I need to replace
, but I think later
, maybe it's not necessary,
because
I'm thinking about this wall
, so I'll put some cabinets first, which is what
I am today. I ordered some IKEA cabinets, and
I will put them on this wall
. The idea is to hope that
my side can also be photographed
. Sometimes I want to change the background
or have a different theme,
so I might go to this today. Part of
that side will take it
. I'm going to clear it now
because it 's very messy.
Originally IKEA was coming this afternoon, but
just called and said they'd be a little earlier,
so it's about 20-30 minutes later,
so I'll quickly clear it first. Check it out
, and then he will come to assemble it . Come here . Then I will show it
to everyone
after finishing the whole thing. After that, what the scene will look like,
then I will collect it first.
Well , that's roughly it. You can Seeing this wall
is now
completely empty,
then I have replaced some of these plugs,
like those socket covers or those switch covers
that are the same color as the wall. I have to ask the water and electricity to deal with that. If I
come again, this one It should be a camera that is
mainly
placed in the middle.
You can see that there are two on it,
so if I want to shoot vertically,
I can shoot directly, or I can
shoot
directly.
For that scene
or this scene or this scene
, the usability is very simple,
OK, this is my fantasy in my
own mind. After I get it actually done,
will there be enough space?
Will it change ?
If it's more stuck or something,
we 'll look at it later.
Well, let's wait for him to come and install it
. Well, it's roughly
our first stage. The renovation has been completed. As you can see
, the IKEA personnel have come to install it.
Then I will probably do some finishing
, and then we will do some decoration.
Now it looks like
this, but of course it is not yet.
We are
officially lighting it up.
I just wanted to introduce our environment
, so why do I make such a setting for everyone to see?
Actually,
there is
a corner here.
I also want to put a cabinet here, but I
don’t
want to store it only.
I have some clothes that may be photographed, and I want to hang
them here. So when
I was looking for this series of IKEA, I found it.
They
have two depths to choose
from.
One is the general depth, which is the depth of a general wardrobe.
This side can't fit in.
It has a shallower one. This side is just enough to fit in
. And the height side is very strange. Look here. There is
a stepped ceiling , so it is not easy to find a height that can be matched,
so I think it is quite suitable when I find this. This is the size of different cabinets.
You can choose in their software.
How to assemble it?
When combined
, it will show you.
This is a big one,
and this is actually the size of a cabinet.
They have different sizes in depth, width and height for you to combine.
You can choose this
This kind of open cabinet, or choose this type of cabinet
, you can put it like a drawer,
or put a compartment directly inside,
or a large door like this.
There is another one that I need to pay attention to when planning. It
's like these switches with some lights and
some plugs on the back,
so
you have to say that this opening in this cabinet needs to
not block the plugs or it will be very troublesome
, so you can probably go to their website
and have some of those sizes. In planning, you can
measure what size is needed in the place and then compare it.
Another important point is the place where the foot is below.
You
can see that it can add a foot.
This foot is not preset, but it allows you to increase
the height of the foot. It 's just so that when the
robot can come in at any time,
it can still go in and sweep under it,
because what I hate is that you may have a cabinet
and then there may be a little bit of depth under it, and then
when you finally move it, you find
it's full of dirt, dust or cockroaches underneath.
The
corpse is disgusting , OK, so now I think
it can be taken from a normal shooting angle , so I may be able to sometimes
lean a little here
, maybe I can see the curtains more places
here. Sometimes I can type some words,
or I can move the whole thing over and
put the camera on this side
, in front of this place
, that may be using this cabinet as the background
, there is
some light, what can I display on it,
and now there was originally a small cabinet here.
If you
remember,
I will put it on this side now, and
this side will become the same side as it was. This cabinet is the same design
anyway
. I can decorate it the same way.
I might be able to sit here and take some pictures. You
should remember this scene
. You should see this scene most often.
Sometimes I stand there.
I took it here
and saw this scene . Now it becomes another cabinet here
. I may come over a little bit or go over a little bit, and it
will become that this wall can be photographed in both corners, and
then this wall can be seen. It ’s just
empty. Sometimes I may want to shoot some product shots or something. When
I need a relatively clean background,
I can shoot there.
Maybe it’s black or white
. You can
look at my previous shots. I know that
sometimes
the
background is black and sometimes it
is white When you shoot at a little place,
you can raise it to shoot the product
, or lower it a little and lower it.
At the same time, I am planning this way.
I also let it say this table.
Sometimes I have to shoot out of the box. I can move it to this side.
I can Sitting here to take pictures of unpacking,
or if I want to sit over there, I
can take pictures of unpacking in the newly created corner. There are wheels under
the table, and there are also wheels under the
lamps. Besides, of course, no one usually helps me to take pictures. When
I was shooting by myself, this thing
is
now planned to be photographed on all three sides. Basically, this thing is placed in the middle
, so I don’t really need to go to it. I
really
need to move it. It
’s just a matter of moving the wheels left and right about an angle.
Then after I mount the camera, which side do I want to shoot at,
or a slight angle,
or even the height,
so
I think it is very convenient
. The advantage
of
this design is that the camera is placed in the middle.
Generally speaking, when I stand here to shoot,
I also have a light from this side and a light
from this side. Today, when I want to turn around and shoot here,
this light turns to turn and shoot
that
way.
A light moved it here and there,
so basically
all the things that need to be moved, the space in the middle is vacated, and
the heavy scenes are all in the corners
, so
this should theoretically be easier to use
. Let
's
see what needs to be used first, and then maybe add
more About $16,000,
then of course you have to add shipping
. I think it is a few hundred dollars for shipping,
and the assembly cost is about
6.5% of all the things you need to assemble.
In fact, it is only $17,024.
I personally think this is quite a good deal.
A combination
They
actually have other cabinets, but they all have software that allows you to design what
you want on them. If you are interested, you can go and see for yourself.
This is not a karma
. I just happened to share it
. Today's video will be here first.
I'm Apple Daddy
. See you in the next video, Bye