there are many reasons why you may need
to tune your TV
perhaps you're using your TV for the
first time and want to watch your
favorite shows or maybe you're looking
for a missing Channel that wasn't your
TV Guide but has suddenly disappeared
regardless of the reason here's a
step-by-step guide on how to tune your
TV to view analog and digital broadcasts
in order to watch analog and digital
broadcasts you'll need to tune your TV
out of the box to do this go through the
initial TV setup until you reach the
screen prompting you to choose the type
of broadcast service to automatically
search for and then select the type in
this case digital and analog next choose
your TV connection you'll have the
option of choosing an aerial your cable
provider or other TV cable providers if
you choose your cable provider the
parameters will be automatically filled
in to select start to begin the scan if
you choose other TV cable providers you
have the option of scanning a broader
range of broadcast frequencies either
using the quick scan or full scan
options however it will take longer to
complete a full scan after choosing your
cable provider the analogue Auto tuning
will begin a progress bar will show the
status of the scan and you can see the
number of new programs as well following
this scan is the digital altitude
similar to the analog you'll see another
progress bar and a number of services
available during the scan finally you'll
have the chance to sort your programs
highlight the program you want to move
and using the arrow keys move it to your
designated location or type in the new
number you want for that channel
once sorting channels please don't
highlight the channel and press the
enter button on the remote control your
channel will be deleted from the list
and you will have to retune your program
list again when you finished press the
back button to save the changes you may
need to retune your TV from time to time
due to changes in broadcast frequencies
when broadcasters change frequencies
channels in your TV guide may be
positioned in different locations or
removed altogether if you notice a
channel doesn't have the same number or
is missing from the list it is best that
you retune your TV you can retune your
analog and digital tuning separately to
access the digital tuning menu from the
home screen please press the home button
of your remote control go to the
settings menu select channel set up
digital set up digital tuning digital
Auto tuning when asked do you want to
start Auto tuning select ok then choose
your TV connection similar to the
initial setup you'll have the option of
choosing Ariel your cable provider or
other TV cable providers select your
preferred cable provider keep the
prefilled end information and proceed by
selecting start if the scan does not
find any channels or some channels you
were expecting you may need to select
other cable providers and change the
scan type setting to full scan a full
scan can take an hour or longer
depending on the broadcaster for
analogue it's almost the same as digital
tuning go to home settings channel setup
analog setup analog Auto tuning and
choose ok when prompted whether you want
to start the Auto tuning process and
that's it for more information check our
european support site we have a
selection of articles to help you with
your tuning and channel sorting needs
[Music]