Welcome to the HellermannTyton ACADEMY, the workshop for real professionals.
Today I want to present to you this brandnew printer, our TT4030.
This printer is for medium and high volume and industrial solutions.
If you have seen this video you can directly start to use this printer.
Step 1: Installation
The first step - the installation.
Please get your CD and first install our driver for the TT4030.
Next step you get the software TagPrint Pro 3.0.
Please install it on your computer.
And now we connect the printer.
First the power supply ...
... and second the USB wire on the reverse side to your computer.
Installation is done.
Step 2: Loading the material
And now step 2.
We open the printer and you can see, you can use small material, you can also use wide material ...
- the printer sets automatically the material in the middle.
Please open the margin stop, put your material inside.
Then you can close the margin stop like this.
So you can see: We go this way into the printer.
We turn the knob so the material is guided.
After you switched on the printer ...
... you can see a yellow light in the middle between the print role and the print head.
Here you can move the sensor in different positions.
For this material we have to move the sensor to the left side until the gap.
The sensor makes two things.
He checks, if there is material is inside or he wants to find a gap.
For 90 percent of the material the sensor is in the middle position but there are some products, ...
… that have the gap on different places like this on the side, ...
... here very small in the middle or here on the side.
Than you have to move the sensor to the right position.
Step 3: Insert the ribbon
And now step 3 - Insert the colour ribbon.
One of my customers told me: Always remember position 99.
If you put the ribbon in the position like a 9 on the reel holder - it's the perfect position.
After that turn the knob to fix it.
So now I show you how to insert the ribbon.
Take it inside, ...
… open the knob, … remove the ribbon core, ...
... fix the ribbon with a little piece of tape, …
... turn it a little bit, …
... hold it, put it back on the second reel holder ...
... and then turn the knob to the left.
Turn, turn, turn a little bit until the the ribbon is absolutly flat in the middle.
And now you can see position 99 of the ribbon.
And now we close the print head and the cover and the printer is ready to start.
If you want to print really high volumes we also sell larger reels.
For the larger reels please use the external reel holder.
Additionally we also offer the perforator and cutter, ...
... if you would like to cut between the labels or if you would like to perforate or cut heat shrinks.
If you want to connect the perforator or cutter with the printer please switch off your printer first.
You can use the Allen key to remove the cover.
Then we have two fingers (screws) that have to go directly into the holes, ...
... so the cutter or perforator is automatically connected.
Then turn the screw inside to the right side.
That's it.
If you like our TT4030 as much as I do please give us a "like".
Watch the next video from the HellermannTyton ACADEMY, the workshop for real professionals.
please give us a like and watch next videos from HellermannTyton ACADEMY the pro... peep
the WORKSHOP for professionals okay I can do this... for REAL professional
... if you like the TT 4030 as much as I do I...
..but now