Hello I'm going to demonstrate setup of customizations on the home screen on the
Shearwater Teric dive computer. I have two Terics here, both in the
open-circuit technical mode but the screen looks different because this one
is setup with smaller fonts showing four pieces four rows of information whereas
this one has three rows of information with larger fonts and this option of
using a big or standard layout is available in all operating modes and I
will show you how to adjust that now. We'll press menu to bring up menu and
scroll down to settings and we'll enter into the dive mode setup and I can now
change the layout to a big or standard layout, now this layout home screen and
function buttons setup are independent for each modes so in open circuit.
Recreational I can configure those differently than I would for technical
mode and it's not going to mess with my technical mode setup. So in technical
mode I'll leave it at standard and now I'll show you how to setup what's on the
home screen. So I come into this menu and I can change it between one two or three
piece of information and then both of those in pieces of information I can
pick from a large list of options, so I'm going to put the decompression tissues
bar graph there and I'm going to put the current AI tank pressure beside it and
now we will go back to the home screen and take a look at that. So what we've
got is that those information there on the home screen and the gas used to be
here and because the gas is a piece of important piece of information if it's
not being shown anywhere on the screen it moves down here to the bottom so this
is a currently selected breathing gas. And the rest of the information is
always here on the info button so I can scroll through the various information
displays some of them don't timeout like the AI tank pressure information screen
doesn't timeout the compass doesn't timeout but other screens will timeout
back to the main screen after about 10 seconds or I could jump back to the home
screen by pushing the left button. But I have lots of information and the tissue
is also does not timeout back to the main screen but we'll just scroll back
to the main screen now. And I will show you how to customize now the function
button so the function button is customisable it's a quick shortcut to
what you want it to do. So I've got it set right now to the compass and that's
the default so it brings up some compass options when I have that and I can
unmark the compass or I could remark the compass and I have this option here to
show what is currently hidden and what that does is it brings up this Outer
Ring compass you can see this this arrow will always point to north and then when
I mark the compass I get a green mark at the heading I marked and it makes it
easy to find your way back to where you've marked, note that the battery
won't appear during a dive so it wouldn't be in the way there, so I hide
that. Just a quick note there also is the other compass the standard Petrel
Perdix style compass available as well. So ok we're going to customize this
function button we're going to go back to the settings menu and we're going to
go into the dive menu and we're gonna say that the function button brings up
the stopwatch, the options that you have here are going to be dependent upon the
dive mode that you're in. What I'm also going to do is I'm going to change this
to show the stopwatch because if you find that the stopwatch is a very
important feature you might want to have it on both the stop on the function
button and on the main screen. So now this function button brings up the
stopwatch I can start it it's going to continue to run here.
I can then stop it or I could even reset it and that makes it very easy to change
the stopwatch. Now if I didn't have it on the function button I'd have to come
into the dive tools menu and I could access the stopwatch there but you can
choose what what the most important feature is to you and program it into
this function button a few more things to go through about these customizations
is that in the open circuit technical mode in all the technical modes
including the closed circuit with bailout if you're using the big layout
you lose that homescreen customization so you can see in the standard layout
the homescreen customization is there, big layout no homescreen customization
and that is because for technical decompression dives this decompression
information and time to surface information are very important planning
and current state information displays but in other modes such as the open circuit recreational. you do have some customization even in the big layout you
can't change this NDL the decompression stops would show in this place as well
or safety stop show here as well you can't change that location but I
can set up the the other location to show you know what's most important to
me and so there's a lots of customizations that we have on the Teric
and you can you know really customize it to you are diving and what works best
for you Thank you.