Here we're doing a dual putty for the doctor to make temporary crowns
at chairside in the office we're injecting the light body impression
material, so it flows into all the embrasure areas
then we're gonna mix GC laboratory putty, the blue and the yellow
push it on top of there, so we get a really great impression and pick up all the tooth anatomy
so the doctors can make really great crowns, without using a stent
it takes about a minute to mix till we get a nice green color
Roland does a good job
He rolls it, he's gonna apply it
push all the material into all the embrasures pick up as much tooth anatomy as we can
let this set for about 3 minutes then we'll show you how to trim it
good here's the 2nd part to the putty matrix
we let it set Roland's taking it off
carefully not to damage the wax see all the perfect anatomy
great flows in-between all the embrasure areas, good
now he's gonna scallop trim it
make it easier for the doctor to get it in
the patient's mouth cut off the bulk form from the model
take some of the thickness away
Now he's gonna start to scale it so doctor
can see how material flows while he's making the temporaries, make sure he
gets a good border.
really careful not to get any of the margins
excess out of the palate
remove more of the additional thickness
good
good job Roland