How much does this thing weigh?
-Well, try to pick it up.
-Okay.
Alright.
-Be nice to it
-105 lbs -105 lbs
-It consists of four motors connected up to these spinning magnet arrays
and if you spin these fast enough it will actually levitate.
-That's correct.
-Let's see if we can do it
Ready?
Let's fire it up
-It's lifting.
-Okay, it's flying now.
-Is it?
-Yeah, definitely.
-Now it is so easy to just move around
That's amazing.
-Give it a push. Like, it's got some real-
-Wow.
It can carry some weight, eh? -Yeah
-That is amazing.
So how does it work?
Well, it's similar to how a magnet falling through a pipe is slowed down
Anytime a conductor experiences a changing magnetic field
electric currents are induced in it which create a magnetic field to oppose that change
And in this case the spinning magnets induce currents in the copper sheet.
They create a magnetic field which is nearly a mirror image of the spinning magnets
and so they're repelled.
If the rotors spin fast enough, this repulsion leads to levitation.
That is awesome.
-Let's shut it down now -Yep
-It's just gonna come
gently land.
-The induced currents then encounter resistance in the copper
so they dissipate their energy as heat.
Whoa.
And this copper is pretty hot.
- It's gotten warmer. Yeah, I can still keep my hand on it.
At least for a second or two.
- But it is like a hot mug of coffee or something
I experienced this before with another electromagnetic levitation device.
Except with this one the changing magnetic field was created by an electromagnet in the base
inducing currents in a light aluminum plate which levitated.
Whoa!
The plate got so hot you could boil water on it.
Check how hot this plate is.
If you have two north magnets facing each other,
they normally just kinda like fall off.
-Yeah.
Is there a similar problem here or not?
-Not really. No.
And the reason is: the magnetic fields that are induced by currents in the copper sheet
are a mirror image of the applied magnetic fields.
And the effect is so quick that as it moves it just kind of follows it around.
- Making this device work in practice is harder than it looks.
For one thing the magnetic field of the permanent magnets has to be very strong.
Neodymium magnets are strong, but there's a special configuration
you can use to make them even stronger.
- It's called a Halbach array.
They're used in particle accelerators.
They're used in fridge magnets, actually -
Halbach arrays, so they're stronger on the side that sticks to the fridge.
So they use less material, overall.
- Magnetic field lines run from north to south.
They're normally symmetric on both sides of a magnet.
But if you rearrange them like this
the magnetic field lines are channeled almost entirely into one side of the magnetic array.
And they cancel out on the other side.
This configuration produces a much stronger magnetic field,
without changing the properties of the magnets.
In these rotors there are 12 wedge-shaped magnets.
The magnetic poles are fixed in this particular arrangement.
This increases the magnetic field on the bottom side and
almost eliminates it on the top.
As the magnets spin they create a rotating magnetic field in the copper beneath them.
This induces currents that create magnetic fields
which oppose the magnetic field of the spinning magnets above.
The result is a repulsive force that is effectively lift for this quadcopter.
But in addition to lift there is also drag.
Energy is clearly being dissipated in the system
as the heat produced by the induced currents and the copper.
That energy comes from the fact that magnetic of the induced current
is not a perfect mirror of the spinning magnets above.
Instead the induced magnetic poles are slightly ahead.
So they produce a backward force on the rotors
which is really a backwards torque
and that's why the rotors on alternate corners have to spin in opposite directions
Because otherwise they would produce a net spin
and turn the whole machine in one direction.
This way they cancel out.
This principle has been used to achieve levitation
in everything from Maglev trains to hover boards.
And it's being considered as a means to make the Hyperloop.
A super fast system for transporting people and goods
through tubes at very low pressure.
But instead of spinning the magnets, the vehicles motion itself
would cause the magnetic field to change in the conductive track below.
So in the future you think this is gonna be how we travel?
- I think ongoing developments in digital motor controllers and very powerful magnets
will mean that talking about moving humans and cargo at extremely high speeds
is actually something that we can as a species kind of look at,
and be like: wow!
It turns out that getting from one city to another city in the same day
is something that the next billion or two billion people might have the option to do in one lifetime.
Hey!
Veritasium is supported by viewers like you on Patreon
And by Audible.
Audible has an unmatched selection of audiobooks
plus original shows, news, comedy and more.
And for viewers of this channel they offer a free 30-day trial of their service.
Just go to audible.com/veritasium
Now, if you're looking for a good book recommendation
maybe you can try the one I'm listening to right now,
which is "Elon Musk: Tesla, SpaceX and the Quest for a Fantastic Future"
by Ashlee Vance.
This is a biography about one of the - in my view - most impressive entrepreneurs alive today.
This book was written by interviewing hundreds of his employees,
his acquaintances and Elon Musk himself
So it provides a really in-depth and thorough look at
that incredible determination that's made possible all of Elon Musk's ventures.
So if you're intrigued by him and his work
then you should check out this book.
You can download it for free by going to audible.com/veritasium
Or you can pick any other book of your choosing for a one month free trial.
So I want to thank audible for supporting me and
I want to thank you for watching.