Hi everyone, welcome to HowFixit and today I gonna show you how to repair a Gimbal camera
after a dji mavic mini drone crashes.
In my case, the drone crashed as a result of hitting the wall and the camera fell out
with the stabilization suspension, and also fell out one hinge of battery cover.
To disassemble the drone Dji Mavic Mini you will need the following tools:
Phillips 1 screwdriver Tweezers
Plastic tools In the description left links where to buy
these tools
Before you start to disassemble, remove the battery from the drone.
Take a Phillips screwdriver and remove 4 screws on the bottom of the drone.
Now move on to removing the top cover of the drone body.
I recommend using a plastic tool, because the Mavic Mini case is plastic and can easily
be damaged.
Open the housing evenly and slowly so as not to damage the internal latches.
The top cover is removed and now you can set the camera to the correct position.
In this process you need tweezers with sharp ends.
Without tweezers it will be difficult to set Gimbal.
The Gimbal camera in the Dji Mavic Mini is fixed to the rubber mounts.
When the drone falls, the stabilization suspension drops out of these mounts, so they need to
be installed back onto the camera brackets, and after that, installed in the drone’s
body.
Rubber mounts are installed quite simply, but without tweezers it will be difficult
to do.
Just push the rubber mounts into the case and check how it is fixed.
The camera mount is installed and now you can assemble the drone back.
If during the fall of your drone the cables was torn off or the camera is damaged or you
need instructions for the complete disassembly of the drone, in the description I left a
link.
The drone is assembled and now you can turn on and check the camera.
So, the camera works and is correctly fixed.
Now you can use the drone again.
On the next flight, be careful not to fall anymore.
On this step the repair of the Dji Mavic Mini is completed; you were on HowFixit and see
you guys next time.