this is set up of the ufe battery-powered doorbell 2k for starters we have to get the
hub set up first so that's what we're going to do so step one is taking the base station
and powering it up and plugging in the ethernet cable which came provided so that's what we're
gonna do and you're gonna do this before you set up the actual doorbell so first we're gonna take
our network cable plug that in we'll come back here plug in our network cable to our router
and then power our device so tuck that in over there and hopefully you can see that that is
actually blinking red which means that we can come over to our application and we are going to select
add a device home base station it says plug everything in which we've already done so we're
going to select next all right this one it wants us to connect to the same wi-fi that the home base
is connected to which we're gonna find out if that includes the five gigahertz so we're gonna select
next and then we're going to wait one minute until the base the home base led turns from red to blue
and uh should welcome to ufe security follow the instructions in uv security app to set up
the system hopefully you heard that so we did get prompted so we're going to select net and
it wants us to scan so we're going to hit scan qr code only this time and then the qr code is
actually on the bottom of the base station so we're going to come over here and find it and it
scanned it homebase receives a pairing request press the sync button on the back to accept it
all right so we are going to do exactly what it said which is click the sync button on the back
home base was added successfully so it says the home base was added successfully however
the application says it was not so we are going to and here we can see even though it said it
wasn't added it prompted that it was added and up here was the serial number i just changed the name
of it so the serial number wouldn't be there but we can set we can see it was successfully added
next what i'm going to call step two in the setup process is actually pairing the the doorbell to
the app even though you probably should mount it first but i have a good idea of where i want this
so we're going to peel this off first we're going to come up and say add a new device we're going to
scroll down to where it says doorbells and we are going to see two different types wired and battery
powered we want the battery-powered doorbell and again there is a qr code on the back we are going
to tell it to go into scanning mode and then i'm going to pick up my doorbell off camera here so
we are supposed to press the sync button until we hear the beep which i heard the beep and we
can see blue blinking now so we have done that so apparently the home base station is emitting a
sound wave so what that tells me is you actually do need to set this one up first so what just
happened off camera is i pressed the sync button again ran downstairs the base station said ready
to add device then heard a touch tone sound effect almost and then it paired the doorbell
to the base station and we are back up here and it says added successfully we're going to select next
so it's letting us know that the battery in this comes at eighty percent so you can have a choice
for fast charging or normal we're just going to say got it and right now it's asking is there a
traditional what that means is does it have access to a power supply we are going to say no because
this is the purpose i got requested this one is so that i could test a battery version so we're gonna
say no i don't have existing adorable wire and i don't want to and it's going to apparently run you
through a little doorbell setup video which i'm not necessarily going to make you sit through so
next it's asking does your doorbell face a street in my case i'm going to say yes all
right so doorbell setup we're going to zoom in on this because it's asking questions is it shorter
than or equal to 10 feet or 3 meters or longer than 10 feet or 3 meters and in my particular
case i'm going to say shorter than so directions for mounting its sidewall if i wanted to so this
is check live view to make sure that you actually have a signal and there we do have a signal
so we're going to say continue so we do we can also do a signal test which is what we just did
we'll swipe over check the live view so again make sure it's properly placed and then you can kind of
check your angle there mounting instructions for the wall plate
depending on what you got and then how to properly install it now we're calling this
the setup process because the installation for this is actually ridiculously easy
you