How to Make Beer Hats. Making your own beer hat is easier than you think – and wearing
one makes it a lot easier to clap for the home team. Follow these steps to sport a handmade
beer cap at the next big game. You will need Heavy-duty tape A stapler A baseball hat Two
yards of plastic tubing Two tube socks (optional) and two bull clips (optional). Step 1. Create
a heavy-duty tape sheet: Overlap two 9-inch-long tape strips, sticky sides together, starting
the second piece at the mid-point of the first strip. Flip the joined pieces over and continue
adding new overlapping strips until the sheet is over 6 inches wide. Step 2. Cut the sheet
to measure 8 ¾ inches by 6 inches. Overlap another length of tape along one of the shorter
edges. Roll the sheet into a cylinder from the opposite end, and secure it closed with
the exposed tape. Step 3. Check for a snug fit by inserting a beer can into the cylinder
and adjust if necessary. Step 4. Cut the cylinder width-wise into two equal-size pieces. Step
5. Cut two 5-inch strips of tape and tape them over one open side of each cylinder,
making a loop to hold the cans in place. Step 6. Attach the cylinders with loops to each
side of your baseball hat with staples. Use socks as an alternative: Double knot two tube
socks together at the open ends and staple the socks to the cap with the knot at the
top. Cut a four-inch horizontal slit from the top of each sock through which you will
insert the cans. Step 7. Cut the plastic tubing into two equal lengths. Hold one end in place
at the bottom of the holder and wrap the other end around the back of the hat and over the
bill, making sure to leave enough tubing to reach your mouth. Tape the tubing in place,
and repeat for the opposite side. Stop the beer from siphoning out by pinching the tubes
with bull clips. Step 8. Crack open a couple of cold ones, insert them in the beer holders,
place the straws inside, put on your cap, and enjoy! Did you know Did you know? The
country of Belgium has the most beer variety – 400 individual brands.