Hello friend welcome to my video
This video explains how to configure the IPSec VPN Client to site feature on Fortigate device
so that the devices can be accessed and remote local area network safely
Configure a user and user group
Go to User & Authentication > User Definition to create a local user vpnuser1.
Go to User & Authentication > User Groups to create a group vpngroup with the member vpnuser1
Policy & Objects -> Addresses to create address ranges for internal VPN networks
Go to VPN > IPsec Wizard and configure the following settings for VPN Setup
For Template Type, select Remote Access.
For Remote Device Type,
select Client-based > FortiClient.
For Incoming Interface, Choose Port WAN of device
In the Pre-shared Key field, enter sample as the key
In User Group: Choose VPN group which was created before
In Local Interface: Choose Port LAN
In Local Address: Choose address range for IPSec LAN which was created before
In Client Address Range: Enter IP for VPN client
Adjust the Client Options as needed, then click Create
You need to see the information on the VPN server to configure on the client side
Go to VPN > IPsec Tunnels and edit the just created tunnel
Click Convert To Custom Tunnel
You need to save this information to configure on the client side
To configure FortiClient. Download and install FortiClient VPN from Fortinet
Set the VPN to IPsec VPN and the Remote Gateway to the FortiGate IP address.
Set the Authentication Method to Pre-Shared Key and enter the key
Expand Advanced settings
Adjust the same configuration as the VPN server obtained in the previous step
Then click save
Enter the password then select connect
Successful connection
Now you should be able to connect to any address on the office Network
As always if you found this post useful and subscribe to my YouTube channel
Help me 500K subscribers