Knowledge is a major and significant ingredient for safety. During the next
few minutes, you will learn some basic rules and instructions associated with
the Toolcat utility work machine. Unlike other types of off-highway utility
machines, the Toolcat work machine is equipped with a lift arm that can lift
heavy loads or other attachments. Because of these differences, this machine will
operate and handle differently than other types of utility vehicles that
have only a cargo box on the rear of the machine. It is important that you and
everyone who operates a Toolcat utility work machine understands proper machine
operation, and recognizes situations that could result in an accident
injuring yourself or someone working with you. The operation and maintenance
manual for the machine a detachment is your primary guide for safe machine and
attachment operation. Never use the Toolcat machine without instructions. You
will see this Safety Alert symbol throughout the presentation, as well as
in various manuals, the operator's handbook, and on machine safety signs. It
identifies important safety messages. When you see it, be alert to the
possibility of serious injury or death. Always follow the instructions in the
safety message. This symbol points out actions you should avoid to reduce the
potential for injury. Once you have familiarized yourself with
the machine, make certain you were dressed properly for the job.
Do not wear loose clothing or anything else that may catch on controls or in
moving parts. Follow daily inspection guidelines found in the operation and
maintenance manual and on the machine. Keep the Toolcat machine properly
maintained, and check the tires for proper inflation pressures. The cab
provides falling object protection, or fops, and rollover protection, or ROPS.
Inspect the structure and fasteners daily before operating the machine. Never
remove or modify this safety feature. Your particular job application could
require additional accessories, such as a backup alarm, cabin closure, and special
application kits to protect the front and rear windows. After entering the cab,
adjust the seat and steering wheel if necessary to a comfortable position. The
operator and passenger should always fasten their seat belts for restraint
before operating the machine. Adjust them so they are snug across your hips.
Remember, only one passenger should ride in the machine. The Toolcat machine has
a hydrostatic drive system with low and high range travel speeds. Always avoid
making sharp turns when operating. You must fasten the shoulder belt to the lap
belt before operating in high rage. This additional restraint is needed if you
accidentally hit an obstruction. The tool can't work machine is equipped with a
toolkit interlock control system, or ticks. This system requires the operator
to lower the armrests before the lift, tilt, auxilary hydraulics, and traction
drive functions can be operated. The travel direction control lever has three
positions. Forward, park, and reverse. The lever must be in the park position to
start the engine. Never attempt to start the engine or operate the controls from
outside the operator's position. This is dangerous and could cause serious injury
or death. For example, the lift arm or attachment could suddenly move. Correct
wheel alignment contributes to proper machine handling. Always check wheel
alignment before operating. Use the instructions provided inside the cab or
in the operation and maintenance manual to make wheel alignment adjustments.
A variety of attachments are available for the Toolcat machine. Use only Bobcat
approved attachments. Never exceed the loaders rated operating capacity.
Overloading could cause tipping and resulting injury to the operator or
passenger, and damage to the machine or attachment. Never exceed the cargo box
load capacity. Avoid top-heavy loads. The loads high center of gravity will affect
the overall stability of the machine. Always secure loads that could tip or
fall, and avoid sudden stops which could cause loads to shift. Do not exceed the
towing capacity or the trailer hitch tongue weight capacity of the work
machine. When towing, always drive slowly and avoid making sharp turns. Check the
machine load capacities decal for maximum rated capacities of the work
machine. The loader rated operating capacity, or ROC, is determined by using a
standard dirt bucket. In this example, the ROC is 1500 pounds. If longer buckets or
pallet forks are used, the load center moves forward and reduces the loaders
ROC. Also, if very dense material is loaded, the volume must be reduced. The
maximum cargo box load is the load that can only be carried in the cargo box
without any load on the lift arm. In this example, the maximum cargo box load is
2,000 pounds. The machine rated capacity is the combined weight of the load on
the lift arm, the cargo box load, the operator, and passenger. In this example,
the machine rated capacity is 2200 pounds. If there is no load on the lift
arm, and no load in the cargo box, the maximum tow weight in our example is
4000 pounds. The total rated capacity of the Toolcat
work machine is the combined weight of the load on the lift arm, cargo
box load, operator, passenger, and tow weight. In our example, the total rated
capacity of the work machine is 4,200 pounds.
To install an attachment to the work machine, always make sure the attachment
is properly secured using the Bob-Tatch mounting system. Make sure the Bob-Tach
locking levers are fully locked down and in the over center position, with the wedges
extended through the attachment mounting holes. Operate the tool cap machine on
level ground when loading, unloading, or turning. Always look to the rear before
backing up. Look in all directions, including the direction of travel before
moving. Keep bystanders away from the work area. Do not travel or turn with the
lift arm raised and slow down when turning. When raising the lift arm, always
keep the bucket or attachment level to prevent materials from falling off the
bucket. Always carry the bucket or attachment as low as possible for the
best stability and visibility. Avoid obstacles, drop-offs, or holes that could
cause tipping or a rollover. If you feel the machine tipping, stay in your seat
with the seat belt fastened, brace yourself, and lean away from the impact
point. Do not attempt to jump. When driving up and down slopes, always keep
the heavy end uphill. Go directly up or down the slope. With an empty bucket and
loaded cargo box, the back end is the heavy end.
Do not drive across slopes or hills. Slow down before turning, and always avoid
sudden turns. Drive slowly on slippery surfaces. Use the rear differential lock
for extra traction. The operator and passengers should keep
their feet and arms inside the cab when the machine is being operated. Check for
overhead powerlines and underground gas or power lines before excavating or
trenching. Call 1-888-2528-0808 before
you dig. Never reach or stand under a raised lift arm. Moving a lift arm
control or a part failure can cause the lift arm to drop suddenly. If the lift
arm must be in a raised position for service work, it must be supported by an
approved lift arm support device to prevent accidental lowering. Also, an
approved cargo box support device must be used when the cargo box is up for
service. Make sure the cargo box is empty before
raising it for service. Never carry riders on the machine, they could fall
off causing serious injury or death. Never use the machine as a man lift or
work platform. Always stop the engine and let it cool before refueling. Do not
smoke when fueling. If you must work in an enclosed area, make sure you have
adequate ventilation. Exhaust fumes can kill or cause serious illness. Keep to
the right when traveling on roadways, and remember to follow all local rules and
regulations. When parking or exiting the tool camp machine, always park on level
ground. Lower the lift arm and place the
attachment flat on the ground. Fully lower the cargo box if it is not already
down. Pull the engine speed control all the way back, with the travel direction
control lever in park. Move the joystick control to neutral. Stop the engine and
remove the key. Raise the armrest, unbuckle the seatbelt, and exit the cab.
When preparing the machine for transport on a trailer, remember to check that the
trailer and towing vehicle are of adequate capacity. Drive up the ramp
keeping the heavy end uphill. Use ramps of adequate strength. Wood ramps can
break, causing injury or death. Install chains using recommended tie-down
procedures. Becoming a proficient Toolcat utility work machine operator
requires knowledge, skill, and good judgment. Be that operator. It's
impossible to cover every situation you could encounter on the job, but viewing
this presentation is one way to work toward those goals. For additional
information, technical specifications, or training resource information for all
Bobcat equipment, see www.bobcat.com.