hey what's up everyone welcome back to my youtube channel today I'm gonna be doing
a mirror replacement on my dad's Camry a couple videos ago I was going over this home link mirror
that had bought for like 40 bucks on eBay and it was actually off a Nissan is the Gentex mirrors
that are been used for the last 15 or 20 years on almost every make or model car out there on the
market so what I'm gonna do today is I'm gonna do the retrofit onto the Camry with the wiring
and everything the Camry comes pretty winding the console up top but one of the you know I
was reading online a lot of guys they just end up tapping it but you actually buy the harness
for it with the mirror on eBay the harness I believe is like 30 bucks which is I paid like
35 40 bucks for this mirror so I'm not gonna pay 30 bucks for the harness so I'm just gonna tap it
with some quick connects on my dad's car first thing we're gonna do is remove this pan up here
or clips that hold it in so is this thing good we've got four white clips
that hold it in one is still stuck in the ceiling here so I got to pull that
out with that the cliff topper and then find cable right here
white plug with white and black white and gray so this thing once you you just pull it out it's
just stuck up here so so the harness there's the one that yeah you could buy the plug that close
make it plug in play or you get to tap the wires I think that so that white and black is ground
the gray is it might be constant and when a white is switch so I'm gonna test it with my multimeter
I'm in here I'm gonna take the moon it's just one bolt I'm screw it and slide it off before I start
I'm going to test using a multimeter to test the voltage on your so just using these paper
clips is stick in there too to get a contact so I can test it black and white is ground
alright so the middle wire which is the white wire is constant and
then the grey wire switched for this application so we got that settled
someone installed this Yi dashcam in this car while I'm doing this - earlier I cut
the hardwired with a 12-volt straight to the car using a 12 volt battery with this time to
splice them now what I'm going to use is I'm just going to use these quick connects these
crimping quick connectors on here usually I would do my soldering heat shrinking all
that but since I don't have any my equipment on my dad's house I'm just gonna use these for
simplicity's sake and you know to speed things up as I showed you on my previous video on this
mirror I'm gonna hook up the the color you know they're already tested all these colors
so the black and red on here is constant power so I'm gonna hook it up to the white wire on
the Camry and then I'm at the same time I'm gonna hook up the ground and then the switch
wire on this mirror was orange so I'm gonna hook it up to the gray wire and I'm gonna
do that along with my 12 volt outlet that I am going to do for the front view drive - camera
I made all the connections clipped in the other and it's all done I'm
gonna tuck it up in there test everything before I put it back together that works
I'll mix everything back up in here push the harness for the mirror straight this way
check this away then I'm gonna get the rest of the wiring for the dashcam leave the whole
coil up in here cuz this this one comes with the right angle whatever you want to
do a shorter one you could always put it there but these I'll run it down use the same mirror
moldings to hide them plug the USB power in squeeze all the wires up and they're just
playing a room up in this console so I'm gonna plug this in and install them near
the mirror gonna be installed the same way you installed the other ones I just tighten it up
push the wires through plug it in so now that I got the mirror on everything's tested working
I'm going to tuck the wires in and use this little trim piece that I have right
here to put it in I'm going to also tuck the USB cable for the front camera also
got everything mounted stuck the camera right on the windshield with 3m tape so
everything's good working home link buttons all worked compass comes on and then comes
on so everything's working good of you guys liked the tutorial please like share subscribe