hello guys
this is my review on
my Pro stainless steel OX trowel
14" ready broke in for finishing work
and this is a clip of the job that it is about to under take
all the cement work
is going to be done with this trowel
all the skim work is going to be done with this trowel
and
the reveals the base
every thing is going to be done on the outside with this trowel bar obviously it's going to be getting a wet dash finish
or rough cast depends where your from what you say
so i am going to speed up the video guys
there is the OX trowel in action
guys the first thing that drew me to the OX trowel was the handle
it looked very comfortable
and more importanly it is very very comfortable
you'll see the bit im talking about now
I feel that a plasterer has designed this handle guys
i really do
the rubber guard at the front is very comfortable especially for me
when i personally put allot of pressure on the area of the handle
when i am troweling up ceilings and generally when the finish is setting
thats the part where i put alot of pressure on
so it has made my life a bit easier
secondly it's february and its very cold
that bit has acted like a piece of insulation
it has made life a wee bit more comfortable
so it's not cold when you set down your trowel for a while
pick it back u again
its just a lot more comfortable
i even like the colour of the handle
it helps to stop any misplacement
not that i would misplace tools
but it would definitely not be lost in a room
guys further more it worked extremely well
it's finished both sand and cement work and skimming work
to a very high standard
the trowel is very light
and strong
i've noticed that this trowel has 12 rivets
witch i belive enhance the strength
i feel this trowel is competitvely priced
and i believe you will be seeing alot more of them
around the sites and jobs guys
on the left side of the screen
i am giving the wall the 3rd wet trowel
putting plenty of pressure in
using the OX Trowel of course
on the middle of the screen is just scanning over the finished scratch coat
of the extion on the house
on the right
i am putting on
skim coat over a bonding coat with the ox trowel
bonding was also done with the ox trowel
now back on the left
is just a shot of finished work
finished skim work using the OX trowel
and back to the right is i am filling out very badley chipped of wall that was the exterior wall
and thats it all strightend out and devil floated ready for skim of course
guys thats my full review on the
PRO STAINLESS STEEL OX TROWEL
THANK YOU FOR WATCHING