Hello this is Bob from Pangolin Laser Systems.
And I like to show you this awesome feature.
How you can communicate between a mobile device and your lasers- I can enable laser output.
Change the rotations.
Make it flat.
Operate your own design and make it just the way you like it.
And now I'm gonna show you, how to create one yourself.
In this tutorial we will create and upload a Touch OSC template and start communication
with BEYOND.
Additionally I will explain where you can find the OSC addresses, which you can use
inside Touch OSC.
Touch OSC has been chosen for this tutorial, as it's widely available on iOS and Android.
And the editors work on windows and osx.
Now for all of this to work, we first need to enable the OSC server inside BEYOND.
So we click on settings > OSC >OSC server.
Enable the incoming signal.
Enabled outgoing signal.
And change the destination ip from 255 to the specific ip of your mobile.
If you open up Touch OSC, you can click on OSC.
It will show you your local ip address.
And in this case it's 10.10.1.124 . At the bottom area, it shows me the ip address of
BEYOND.
And in this case I need to enter 10.10.1.120 . As you can see it's a cross match.
This is also for the ports.
Outgoing port 9000 on BEYOND is the incoming ports on the mobile device.
The outgoing port from mobile device is the incoming port on BEYOND.
Once we have set this on the mobile device, we can go back.
Go into the Touch OSC bridge.
Disable this functionality.
Code into core medium.
Disable this functionality and we basically have set up the basics for communication.
We can click on ok in BEYOND.
And it'll prompt US to open up the OSC monitor, which I would advise to do.
Once you open up the monitor, we can see what is going on / we know / what is coming in
in BEYOND.
Now I will open the Touch OSC monitor and start creating a small button.
In this case I will create two push buttons.
We will change our address.
In this case we've got to BEYOND.
And we want to enable laser output.
And it is raised from 0 to 1.
Note that it is at the moment sending two signals.
It sends a signal on press and a signal on release.
In this case I will leave it on, as I can show you what will happen.
Now I click on sync to send the template to the mobile device.
On the mobile device or click on layout.
And click add.
It will show me my computer.
And can just click it and it will download it and import it.
It's now named untitled.
I click on untitled.
I can see it's loaded and click on done.
And you see the same two buttons are online streamed.
But I will tray this.
And activate the button and see what happens.
And here is what is happening.
So it's enabling laser output but it's sending a double command.
1 and 0.
And this matches exactly to the editor.
So I will disable the release.
Because I only want to send this signal when I press the button on my mobile phone.
And sync it again.
I open up the touchosc settings on my mobile device with the button.
Click on layout again.
Click on add.
It will find my computer again.
I will press ok again.
And it has updated the template.
And let's see.
I will stop the sync.
Close the editor.
And what it sends now.
Now it enables the output and I can send it multiple times.
And it will send it the same way.
Back to the editor.
Copy and paste the name.
And change enable to disabled.
And only send it on press.
We will sync the button to my mobile device.
Once it's updated, we will stop the sync in the editor.
Go back to BEYOND and see what happens.
Enable/disable.
It all seems to work.
Now where can you find all those addresses.
You need to open up settings > OSC > OSC server.
Open up the information of the OSC standard server.