Hello friends
To open port on the Mikrotik router you need to do 2 main steps: Open port and hairpin nat
Step 1
you create the list of ip addresses
Create a list for the ip addresses of the local area network
Hairpinning is where a machine on the LAN is able to access another machine on the LAN via the public IP address of the router
Create a list containing the public ip address of the Mikrotik router
If you use public dynamic ip address enter dynamic dns here
Step 2 , open port
In this video I open port 3389 to ip address 192.168.1.253
I open this port to remote desktop from anywhere,
from the local network as well as outside the internet
After the configuration is complete I can remote desktop from outside the internet
But if I remote desktop from within the intranet and use the public ip address it gives an error
The next steps should fix this
Based on the ip address lists created in the previous step,
I will mark connection the packets coming from the local area network to the public ip address of the Mikrotik router.
I named it Hairpin Nat
I then do the NAT configuration with the connection just marked
You pay attention to put the hairpin nat on the top position
So I have configured Open Port and Hairpin NAT
If this helps
Don't forget to leave a like and more subscribe to my YouTube channel for more helpful videos
Help me 500000 subscribers