Hi, I'm Mike from 1A Auto.
We've been selling auto parts for over 30 years.
Hey, everyone.
Sue here from 1A Auto.
Today we have a 2013 Toyota Camry in the shop, and I'm going to show you how to R&R the drivers
side door panel.
If you need any parts for your car, click on the link below and head on over to 1aauto.com.
We're going to take the main switch bezel off.
I'm just going to pry up on the connectors.
Disconnect the two connectors here.
We've got the little one for the mirrors, and this switch right here is kind of tricky,
so you got to push in on that and lift up on the outer part of the housing like that
and the switch comes off.
Now we have a Phillips screw right here, and we got to take the plastic bezel right in
here off with a little screwdriver.
Another Phillips screw is here.
I think I have to take this handle up.
You've got plastic clips: one, two, three.
Well that one's broken and then a Phillips screwdriver.
Now we should be able to grab the door panel, and just pry on it wherever the plastic door
pieces are.
Get this one piece.
Then you've got the door marker light, which just automatically came out.
Someone's been in this door.
Whoever owned it prior, and they broke every clip I could find.
Disconnect it and push down that little tab.
If one of the door pieces, these little prongs come off, they're real easy to attach.
Just bring it right back on there and snap it in place.
Make sure you put that marker door harness through that slot, and we're going to bring
it up and make sure that that mounting screw is there.
We're going to bring this through the actual door panel like that.
Make the main switch is out on your harness here, and start lining up all the clips.
Bring it up over the top of the window.
It's a real small little tight lip on this.
Here we go.
Push down so that once you get it over that lip at the of the door panel, make sure this
wire hasn't fallen back out.
Push it right through there.
That's clear, now you can guide your pins on the side.
Snap them in all the way around.
I like to make sure it's snapped all the way around before I start bolting things down.
Now you've got three mounting screws.
Two long chrome and a little small black one.
The black one goes on the handle so we'll go right there first.
Then you have the two silver ones go right here.
Put our main switch back on.
Make sure that outside housing that slides locks in.
The mirror switch.
Before we guide that on we'll put this one on.
This is the actual armrest.
You've got these prongs back here that have to line up.
There we go.
We're going to put our plastic trim back in.
So you're going to line up all those little body clips.
Then the last thing we have our marker light.
Turn it on and click it in.
Thanks for watching.
Visit us at 1aauto.com for quality auto parts, fast and free shipping, and the best customer
service in the industry.