in a previous video we look at the Quinetic kinetic in line receiver and we showed how you
could change a simple one way light switch in any room in the house and we discussed it maybe in a
bedroom and make it two way two way intermediate actually you could install one of these switches
and five others meaning you'd have control over the lighting point from six positions and
this is what we had just to remind you so we had these switches here and i paired four of them of
different styles in order to operate this lighting point which was originally a one gang one way
light switch a traditionally wired in and we've now made it switch from four positions i've had
some questions what happens when the power goes off does the pairing process forget well actually
every time i operate the switch the light goes off but let's have a power cut so if i come to the
consumer unit and i knock off the breaker control in that circuit so we've now lost the supply and
we come back in here obviously nothing's going to work remember from that video if you haven't
already checked it out i recommend you do that these have no batteries in them these three
switches here obviously have no wires and they work on kinetic energy so when you make a movement
creates energy and it sends a radio frequency into here where we installed this here as a receiver
with our line and switching line connections only no neutral and that replaced the switch that was
already there so let's say the power supply now comes back on so let's bring the power supply
back on so the power's on we can see the lights come back on and our original switch works which
is great but has it kept that pairing process it certainly has in order that those are all paired
the other question i got was let's say you wanted to unpair the system okay so in other words we'll
go back to being just a simple one way switch that's not a problem either we had to pair it by
pressing and holding the switch for six seconds if we hold it for about 12 seconds it will actually
clear all the pairing processes that have happened so let's see that so we press and hold the switch
we'll see it first of all go into pairing mode but keep it holding down so when it starts to flash
that's what we saw in the previous video that's the pairing mode so i now could add more switches
but we want to go beyond that we want it to forget the switches it's got here and just leave us with
the original receiver one way switch so you see it's not flashing now so it's cleared itself let's
operate this switch that's fine so let's leave it on nothing happens nothing happens nothing happens
we switch so we just remind ourselves how we do the pairing process so let's just pair it so it's
two way so let's move these out the way let's go for one that looks very similar we paired this
first of all to make it two way switching let's go through the process of pairing just one switch now
press and hold for approximately six seconds wait for the lamp to start flashing
when it starts flashing we're into the pairing process here we go there we go we're in the
pairing process and we operate this switch remember it's sending a radio frequency signal
once it's picked it up you can now see we've got two way switching now what's happened to these
ones here that we were using before do these now work because it's unpaired those switches
do not work so we now got a simple two way as i said before my daughter leaves this one on
a bedside table you could fix it to the wall you could stick it to wall in order that you
could have your switch in a fixed position but she quite likes having it by a bedside
table and this one fixed at the wall simple process taking off a one gang one way switch
installing your inline receiver which works with kinetic energy from here to here to the receiver
it's the Quinetic brand in order to make two way switching so hopefully that's answered the two
questions that predominantly i got from the first video what happens when the power goes off they
stay paired what happens if i want to take off the switches how do i unpair them and obviously we
cleared and paired it and we repaired one as well so as always i hope this video has been some help
you