Welcome back to the Detail Garage.
We're finishing up the detail on this Tesla, we've started by cleaning up the interior
by getting the carpet and the leather looking right.
Then we moved to the exterior starting with the wheels because they are by far the dirtiest
area of the vehicle because this car hasn't been detailed in over four months.
So, by using Diablo Wheel Gel and Sticky Citrus Wheel Cleaner we pulled off all the brake
dust, grime and other road filth to give it that ultimate shine.
Then to wash the entire vehicle we used Citrus Wash & Gloss which produced tons of suds that
pulled off all of the loose dirt and debris and lifted up any stubborn stains for this
high shine.
Now we are going to put on the last touches by applying EZ Creme Glaze and it is going
to fill in any minor scratches, swirls and paint imperfections to give it a slick mirror
finish while give some protection against UV rays and harmful elements that can penetrate
the surface and degrade the finish.
This can be applied by machine or by hand, I've chosen to go by hand with one of our
applicator pads.
Starting off by shaking up the product.
Now we'll apply a few dots to the pad.
Next, we'll dab it out on the paintwork starting over here.
A little goes a long way, this product spreads very thin.
The thin layer is saving product and it is much easier to buff off because if you think
about it only the first layer is what bonds to the surface, everything else is being wasted.
So, by applying a thin layer it'll coat faster, last longer and give a high shine to make
it look better.
As you can see I'm working back and forth in straight lines, you want to avoid going
in any circular motions this way you have even coverage without the risk of installing
swirls or scratches.
EZ Creme Glaze can be used on any color paintwork whether it be light, dark, pearl, gloss or
metallic paint jobs to give it a high gloss, deep wet shine and it enhances metallic flake.
It enhances the shine by filling minor scratches and swirls which visually trap sunlight that
takes away from the overall look of the vehicle.
So by filling in those scratches it gives it a uniform shine like a mirror and a deep
reflective look.
So now that I'm done coating this section of the vehicle I can move on to the rest of
the vehicle.
EZ Creme Glaze only takes about fifteen minutes to bond so after it has cured we'll buff it off.
After waiting twenty minutes we're going to start buffing off the EZ Creme Glaze, as you
can see there is a haze here and that is because it has bonded to the surface and the excess
product can be buffed off now.
Using one of our 2-Faced Towels we're going to buff it off.
What's great about this towel is it has a high plush so it'll pick up all this product
without streaking and since it has silk banded edge we won't install any new scratches or
swirls.
Placing it on the paint and working back and forth as you can see the thin coat of EZ Creme
Glaze comes off nice and easy to reveal a high shine.
To recap we started off by cleaning the interior using our leather products to get the leather
nicely cleaned and protected.
Then we cleaned the carpets and protected them using Fabric Guard to repel stains and
discoloration.
Moving to the exterior using Diablo Wheel Gel and Sticky Citrus Wheel Gel we took care
of any brake dust that was sitting on the surface and washing the surface with Citrus
Wash & Gloss got rid of all the grime.
Then claying it with the OG Clay Bar to get the surface nice and smooth this way it'll
be prepared for a coating such as the EZ Creme Glaze.
If you guys want to learn more about these products check them out on our website ChemicalGuys.com.
If you like this video be sure to give it a thumbs up and we'll see you next time
right here in the Detail Garage.