So, I’m not going to lie. I’m in a bit of a mood. I’m growing really tired of all
the news reports and all the posts on Reddit of riders running wide in corners and either
running into oncoming traffic or running off the road. Running wide in corners is one of
the top causes of motorcycle crashes. So you know what. I’m going to be a little
bit more candid with this video. I’m just going to come out and say it. There is a good
chance that your riding instructor was wrong. In fact, over the years, I’ve received,
literally, hundreds of emails from riders lamenting the fact that their riding coach
was requiring they ride in a manner that made them feel less in control and at more risk.
So, here it comes: Ready? Slow, Look, Press and Roll is wrong. Flat out. It should never
be taught as a riding technique. It’s been getting people hurt and killed since the idea
was first published in the ‘70s. And lets be honest, how many other things
from the ‘70s are at all relevant today? Seriously. I don’t understand… What is
this obsession with the way things used to be. The ‘70s were terrible. The food was
awful. The power was always going out. The music sucked, the movies sucked, TV reception
was mostly unwatchable and even the parenting was awful because everyone was drunk and smoking
cigarettes. We know so much more now than we did in the ‘70s!
Look, Slow, Look, Press and Roll only really works on very gentle bends with lots of visibility;
you know, super easy corners like a freeway on-ramp. And I’ll be honest. I use it in
those situations. But those kinds of corners are not at all challenging. We can see. It’s
not especially tight, there’s not a lot of lean angle and, truthfully, it’s a lot
of fun to rally through those easy corners. And we need to be adaptable; able to adjust
our techniques to the conditions. Slow, Look, Press and Role does work in some circumstances
and in those circumstances; for sure, use it.
But those are not the kinds of corners that we’re running wide in. It’s those tight
corners, corners without much visibility, corners that get a lot tighter half-way through
or downhill corners. Those are the kinds of corners that every single one of us, myself
included, has totally screwed up. So, for the rest of this video when I talk about a
corner, I’m not talking about the easy ones. I’m talking about the challenging ones.
The technical corners that we’ve all struggled with.
The way Slow, Look, Press and Roll has been taught for almost fifty years, including in
some high-performance riding schools, is that we do all of our braking while the bike is
straight up and down. Slow. Get off the brakes and then snap a countersteer. Press. Then
accelerate through the entire corner. Roll. Some programs go so far as to put little pieces
of tape on the ground to tell you where to get off the brakes, snap your countersteer
and begin accelerating. Three pivotal operations in the space of a scrap of tape.
One argument will often be that getting onto the gas early stabilizes the chassis. Well,
yeah, throwing away the brakes causes the front of the bike to spring back up, and snapping
a countersteer puts the bike and the tires into a tizzy fit. For sure, you gotta figure
out a way to stabilize that chassis. But, don’t you think it would be better to find
a method of turning that doesn’t completely upset the bike's stability?
So, lets go over this. Motorcycles change direction by leaning. We all know this. So
we’re riding along, and we turn the handlebar to the right. We press forward with our left
hand, our right hand comes back towards us. We’re steering. But motorcycles only have
two wheels. So it leans away from the direction of the steer. Now, after the bike starts leaning,
the front wheel will hinge back over to the left, and the motorcycle will basically begin
steering through the corner. The bicycle really exaggerates these handlebar
movements. But once leaned over, the front tire is absolutely steering. And we find ourselves
leaning to the left and turning left. Countersteering. Basically, we are managing the gyroscope.
On a motorcycle at speed, these handlebar movements are really subtle and we may not
even realize they are taking place unless we are paying a lot of attention, and we may
make small steering and countersteering adjustments to keep the bike's lean angle where we need
it. So far so good, but here’s where Slow, Look,
Press and Roll really falls apart. It tells us we need to accelerate through the entire
corner. Well, what happens? If we’re accelerating, all that centrifugal force is pushing the
bike back up and to the right. So the only way we can maintain our lean and our turn,
is to add more and more countersteer to add more and more lean to counteract the acceleration
pushing us up and over to the other side. The faster we go, the more lean we need to
keep the bike balanced against the centrifugal force.
Here’s the next problem. Speed equals radius. Right? But, there are practical limits to
how fast we can go through a given corner based on how tight it is. We must go slow
through tight corners, and we can go faster through gentle corners. Accelerating through
an entire corner makes it harder to stay on the road or in our lane because going faster
increases the radius of the corner. Here’s another problem. It keeps getting
worse. Grip comes from weight. Right? Barely touch the ground with your foot and try to
slide it, now put a lot of weight on your foot and try to slide it. Grip comes from
weight. So, as we’re accelerating, the bike's weight is shifting to the rear. taking weight
away from the front tire. You know, the tire that actually makes the bike change direction.
As we accelerate, it's harder for the front tire to steer the motorcycle because it has
less weight, less grip, to keep it stuck to the road.
And it gets worse even still. As your forks compress and extend, it changes the geometry
of our bike. Compressed forks decrease trail, which makes the bike want to change direction,
while extended forks increase trail, which makes the bike want to go straight. In simple
terms, as soon as we start to accelerate in a corner, the bike's geometry makes the bike
stop turning and start to run wide. Think of it like this. How many of life's
problems come down to a simple communication problem? The same is true with our motorcycles.
We are communicating with the bike and it’s giving us feedback. When we use the throttle
we are telling the bike we want to go straight, so if we’re adding throttle while trying
to turn, we are giving our bike mixed messages. It’s no different than all those people
scream and yell at their dog to come to them, then scold the dog when he does. Come Here!
Bad Dog! Mixed messages. So, at its core, the entire concept of accelerating
through the entire corner is a giant miscommunication. It pits countersteering against the laws
of physics. Seriously, I can’t tell you how many times I’ve watched a student ask
their riding coach about what they should do if they enter a corner too fast. And the
instructor will say “just countersteer harder”. Because that's the solution, right? Just lean
more - Because we all know that lean angle and grip is infinite. I mean, it’s impossible
to run out of lean angle or grip, right?. I’ll bet none of us have ever touched a
footpeg in a corner before. Or sometimes the instructor will say “You
should have entered the corner slower” Well great. I’ll just roll back my time machine
and give it another go. Fat lot of good that does me now that I’m in the middle of the
corner. And we haven’t even gotten into all the
problems that arise if there is something unexpected in the middle of the corner, like
a stalled car, a 2x4 or a pile of gravel. Transitioning from acceleration to braking
in the middle of the corner is fairly risky because it’s a pretty delicate process.
So yeah, Slow, Look, Press and Roll works fine in gentle corners with lots of visibility,
and lots of grip; but what happens if the corner is tighter than we expected, or there
is less grip that we expected, or we are having to lean way more than we are comfortable with?
Or what if that downhill corner is more downhill or tighter than it looked at the top of the
hill? We Run Wide. If we’re lucky, we get away with it. If we’re unlucky we get hurt,
sometimes fatally. And this is what has to stop. We need to abandon Slow, Look, Press
and Roll as it’s been taught since the the time of disco balls and butterfly collars”
So, what’s the solution? What‘s the better way? It’s called trail braking. And, to
cut off the keyboard cowboys at the pass, trail braking is not going into a corner too
hot and then grabbing the brakes. That’s not trail braking, that’s “oh shit”
braking, and we can all agree it’s a terrible technique. Oh Shit braking causes the motorcycle
to stand up and it can cause a loss of grip at the front tire. Trail Braking and Oh Shit
Braking are two very different things. Trail braking is still doing the majority
of our braking before we enter the corner then we gently trail off the front brake until
the motorcycle is turned and we can see our exit. In simplest terms, it’s gently slowing
until we can see our exit. Most of us do it in our cars. Hell, my mom, who is the most
conservative driver in the world, trail brakes to the apex of every corner in her Nissan
Juke. With trail braking there is no need to stabilize
the chassis because we never upset the chassis to begin with. With trail braking we are extremely
unlikely to run wide because we can simply add and subtract small amounts of front brake
pressure to put the bike exactly where we want it. With trail braking, we have significantly
more control, more grip on the front tire and we are significantly reducing risk because
instead of adding speed and inertia and energy to a potentially bad situation, we’re slowing
down. And I don't know about you, but I dont’ think slowing down is scary. Going faster
and leaning more than I am comfortable with, well, that scares the hell out of me.
Listen, I was recently speaking with someone who has been teaching the high performance
version of Slow, Look, Press and Roll at the racing level for well over a decade. And I
was, like, “I ride with you man, and you’re not accelerating through the entire turn.
I watch as you slow until you get the bike turned and you can see your exit.”
And do you know what he said “Well, yeah. I’m afraid to accelerate through the entire
corner, but if I had the courage to do it, I’d be a lot faster”
Seriously, this guy is teaching new riders to do something that A) he doesn’t do, but
B) is too afraid to do himself. And quite honestly he has good reason to be afraid.
Accelerating through the entire corner creates a lot of problems. Not only are we going even
faster if we crash, but we are, simply, more likely to run wide and crash to begin with.
Commenters will sometimes say that trail braking is just for the track or that it will cause
people to enter a corner too quickly. And to that I’d say, trail braking is not an
excuse to enter a corner too fast, in fact, it prevents us from doing just that. If anything,
the track is the one place where Slow Look Press and Roll has the fewest consequences.
We get a sighting lap, a warm up lap, and all day to figure out a corner with near perfect
visibility in a controlled environment with acres of gravel traps in case we run wide
(which you will). Our local canyon is where trail braking is really important; unfamiliar
corners, changing conditions, traffic, and plenty of things to run into if we run wide.
Look, running wide in corners is killing us. But what pisses me off is we know why and
we know how to fix it. And the kicker is, fixing it isn’t even all that difficult.
Accelerating through corners, especially tight, blind, downhill or technical corners, is moronic.
And it’s not even faster! I mean, way back in the ‘70s, when this
accelerate-through-the-corner nonsense was first put to paper, Kenny Roberts had already
figured out the whole trail braking and slowing until you can see your exit thing, and by
doing so he dominated the motorcycle racing world. And remember, to finish first, you
first have to finish. You can’t win a championship unless you make it to the checker flag.
Slow Look Press and Roll was developed when paisley bell-bottoms seemed like a good idea
by “seat of the pants” riders who didn’t know any better. It’s time to evolve - everything
else about motorcycling already has. Guys, thanks so much for watching, we do this
to help reduce the risk and increase the fun of riding. So, it would do me a world of good
if you would make it your riding season goal to not run wide through a single corner. C’mon
back and post a comment to let me know how it goes. I love hearing if these videos have
helped you guys. Thanks so much for watching and ride well.