In 2018, Tesla inverted our expectations and shook the EV industry when they adopted
an ST Microelectronics silicon carbide-based inverter for their new Model 3 Electric Vehicle.
It allowed Tesla to shrink one of an EV's most critical components in half.
And it has sparked new interest in a silicon technology as old as the industry itself.
In this video, we are going to take a look at the powerful benefits of silicon carbide-based power
semiconductors.
## Silicon Carbide
Silicon carbide exists in meteorites but almost nowhere else naturally. Almost all of the silicon
carbide in the world is synthetically made. It is a really beautiful rock. I love rocks.
Edward Goodrich Acheson, an assistant to Thomas Edison,
first produced it in industrial quantities all the way back in 1890.
While looking for a way to make artificial diamonds, he heated silica rock and powdered
carbon - called coke - up to 2600 degrees Celsius in an electric furnace. This resulted in coarse
grains of silicon carbide. His method is still used today in industry - the Acheson method.
Made up of equal parts silicon and carbon,
there are over 200 known crystal polytypes - variants in the Silicon Carbide Multi-verse.
It is not fully understood why there are so many polytypes, but they all have their
own unique physical traits. But only three can be used for electron devices: 3C, 4H, and 6H.
3C wafers are not commercially available due to instability at high temperatures,
so practically our choices are just 4H and 6H.
While people have studied the 6H-variant, most commercial research is consolidating to 4H.
Silicon carbide is extremely hard - it was the hardest synthetic substance known to man
until the creation of boron carbide in 1929.
In industry they use it in body armor, to grind things down and as the abrasive for sandpaper.
But when it comes to electronics, Silicon carbide has a special feature that allows its transistors
to operate at both higher voltages, frequencies, and temperatures than traditional silicon.
## Wide Bandgap
Silicon carbide along with other materials like synthetic diamond
and gallium nitride are referred to as "wide-bandgap" materials. What does that mean?
Semiconductor materials have something called a valence band and a conduction
band. When electrons get too much energy and get too excited - like
from a high dose of thermal energy - they break into the conduction band.
Once the electron gets into the conduction band, they are like
little free agents capable of carrying a charge somewhere - referred to as "charge carriers".
Furthermore, when the electrons broke out of the valence band,
they leave behind positively charged holes - remember, electrons are negatively
charged - and those are also charge carriers - capable of doing conduction.
Transistors work because they can assume either an "on" and "off" position.
Roughly speaking, when their electrons are in the conduction band,
the transistors become like internet commenters and cannot switch off, becoming useless.
The bandgap represents the amount of energy needed to make electrons jump out of the
valence band and into that conduction band. A buffer zone between control and out-of-control.
The wider the buffer zone, the more energy needed to jump the bands.
Silicon carbide not only has a super wide band gap - but it is also an excellent conductor of heat.
Three times better than traditional silicon and second really only to diamond. This conductivity
makes it easier to extract and dissipate heat from any such device. Not a bad perk.
Commercial silicon semiconductors top out at about 175 degrees Celsius
before they break out of their bandgaps.
Silicon carbide on the other hand can go to 300 degrees Celsius and beyond.
Maybe even 900 degrees with the right packaging.
This wide bandgap has applications beyond just heat resistivity.
As the voltage in a power device increases, their electric fields get stronger as well.
When the field gets powerful enough, the device suffers what is called an avalanche effect.
The atoms break down and release large numbers of free charge carriers - leading to very large
currents moving through materials. Similar to the temperature situation.
Silicon carbide's critical electric field limit before this avalanche effect breaks out
is eight to ten times higher than that of traditional silicon.
That means a silicon carbide device can handle voltages as many times higher than silicon.
Now that we know about silicon carbide's special powers and why they exist,
we can now move on to an electric vehicle. And how they can use them.
## EVs and Power Semiconductors
Every electric vehicle has power electronics.
Along with the battery and the electric traction motor, the power electronics are one of the big
three technologies enabling today's practical electric vehicles.
Power electronics systems help charge the battery and power the motor.
They are generally made up of four components, but arguably the most important is the inverter.
Electric current comes in two flavors: Alternating Current or AC and Direct Current or DC.
AC will flow in one direction for a period, and then reverse to the other
direction for the rest of the period. DC on the other hand, flows in one direction only.
The inverter turns DC power from the EV battery into AC
power that the EV motor uses to operate smoothly. This is called "switching".
A circuit that performs the opposite direction - from AC into DC - is called a rectifier.
## Silicon Based Power Electronics
Today, many of these power electronics are silicon-based.
The two most popular power switching devices are the Insulated Gate Bipolar Transistor, or IGBT,
and the power metal-oxide-semiconductor field-effect Transistor, or MOSFET.
Silicon-based MOSFET are for low voltage, lower power,
and high frequency applications. They dominate the market for applications below 600 volts.
Silicon-based IGBT devices are used for high voltage, high power,
and low frequency applications. They dominate the market for applications between 600
volts and 6.5 kilo-volts. Most EV inverters before the Model 3 used IGBT transistors.
The issue is if you want to go beyond that 6.5 kilo-volt limitation.
Go beyond that and the electrical fields get
powerful enough to make things challenging for traditional silicon power electronics.
## Economics
Today's modern power electronics face relentless market pressure to do more,
more, more. The success of EV drive technology heavily depends
on how efficiently the power electronics can switch power while reducing operating costs.
Inefficiencies in the switching process
lead to power loss, which materialize as excess heat and additional energy demand.
Furthermore, power electronics circuits are placed near jet turbines or car engines - really harsh
environments with temperatures ranging up to 225 degrees Celsius or higher. So even more heat.
Because of silicon's inherent temperature limits, these power electronics have to be designed with
active or passive cooling systems. But these systems - air cooled heat sinks, direct contact
liquid cooling, liquid cold plates, and so on - are never as effective as we want them to be.
These cooling systems are also heavy and add more cost to the whole system.
A heavier, more energy-hungry EV cannot travel as far or fast as traditional
cars - reducing their overall competitiveness. Incremental research continues but this is where
commercial silicon carbide-based power transistors can revolutionize things.
Remember, because of its wider bandgap, silicon carbide-based power electronics can operate at
up to ten times higher temperatures, up to ten times higher voltages,
and up to five times higher switching frequencies. It is a disruptive technology.
As friend of the channel Bane once said: "Silicon-based power electronics merely
adopted the heat. Silicon carbide was born in it, molded by it."
## The Silicon Carbide Conspiracy?
People have seen silicon carbide's vast potential in the power electronics space
ever since power electronics first entered the market in the 1950s.
So why haven't we seen silicon carbide-based power electronics in the market until very recently?
Some people believe the car companies are hiding an engine that runs on pure water. Is there a
silicon-based power electronics cabal conspiring to hide silicon carbide from the whole world?
The actual answer is rather mundane, and is related to the material itself.
Silicon carbide's very strengths also contribute to its weaknesses.
Producing enough high-purity silicon carbide wafers is hard.
## Silicon Carbide Wafers
Today, silicon wafers are made by first creating a big silicon crystal. The crystal is made through
the Czochralski method, growing a big crystal by repeatedly dipping a seed into a molten
silicon melt. The method has successfully allowed us to create today's biggest wafers.
I talked about this in a previous video, go check it out.
The Czochralski method does not work without the liquid silicon melt.
But silicon carbide's solid form directly passes into the gaseous form
without first turning into a liquid. To use a chemistry phrase - it sublimes before it melts.
Because of this, there is no melt and so silicon carbide wafers cannot be made with
our traditional silicon methods. We need to grow our silicon carbide crystals from gas.
Until the 1950s, the only way to produce silicon carbide crystals was through the
Acheson method - the one where you combine silica and coke into an arc furnace and let it burn. This
worked fine for making sandpaper, but hardly met the purity requirements for electronic devices.
In 1954, Jan Anthony Lely of Philips Electronics discovered the Lely method.
You take a tube of porous graphite and surround it with silicon carbide.
Then you heat the tube to 2,500 degrees Celsius.
Silicon carbide will diffuse its way to the inside of the tube and crystallize on its cooler parts.
Lely's early method created randomly sized, hexagon-shaped platelets
of varying crystal polytypes. It was a step forward but still not suitable for wafers.
So in 1978, two Soviet scientists Tairov and Tsvetkov modified the Lely process to
fix its shortcomings. It works largely the same way, but with very careful control of
the temperatures and pressures, scientists can grow one large crystal of a single polytype.
This modified Lely method - referred to as physical vapor transportation or PVT - meant that
people can grow boules of one pure Silicon Carbide polytype at a rate of a few millimeters an hour.
It's not perfect, however. Companies are still working to make larger sized
wafers - 200 millimeters or so - and defect rates aren't exactly where people want them.
Getting the wafers made to standard is probably the biggest challenge with the process, but it
isn't the only one. Silicon carbide presents some other challenges in the semiconductor processing.
For instance, you can only cut the wafers with synthetic diamonds,
which adds to the overall cost.
Another thing is that Pure silicon carbide is an insulator, so it needs to be doped to conduct
electricity. But diffusing the dopants into the silicon carbide requires very high temperatures,
necessitating other methods.
And so on. This section stretched very long. But I hope I gave a
decent overall view of the difficulties of making silicon carbide transistors.
## SiC Power Electronics
Infineon introduced the first commercial silicon carbide-based power device in 2001 - a
Schottky diode with vast advantages over the traditional silicon variant.
The next major new commercialization was the silicon carbide MOSFET.
The power MOSFET is widely used by the industry due to its fast switching speed
and suitability for high voltage and high current applications.
Silicon carbide MOSFET chips were first commercialized in 2010 by a North Carolina-based
company called Cree. They recently renamed themselves to Wolfspeed in October 2021.
Other companies soon jumped into the space including ST Microelectronics,
ROHM, Infineon and Microsemi.
The EV inverter market has since grown into a multi-billion dollar market.
At the same time, improved manufacturing processes have brought down the costs of the new devices.
What used to cost $700 per inverter unit in 2013 has fallen to just about $450 in 2020,
driven by cost improvements in the transistors and diode components. Though there is still
a price gap with traditional silicon devices, that price gap has gotten substantially smaller.
But even with the price gap, you can design and deploy an inverter with far less attached cooling
systems. Those space, cost and size savings really add up, and people anticipate that silicon
carbide MOSFETs will start challenging silicon IGBTs in their traditional market strongholds.
It's an exciting time for silicon carbide. There are easily hundreds
of papers on this space. I wish I can keep going but the video has to end sometime.
## Conclusion
This is the second time this channel has featured silicon carbide chips.
The first time was in my follow-up to the Soviet Venus video, which mentioned
the use of silicon carbide technologies to build probes capable of surviving Venus's brutal heat.
While I was doing the video, I did not really believe that silicon carbide technologies can
actually get there. But Tesla adopting the Model 3 and the growing EV market
have attracted a lot of attention to the space and other industries are starting to benefit.
For instance, solar inverters convert the DC power coming from a photovoltaic solar panel
into AC power that the utility is capable of using.
Silicon carbide solar inverters have shown 20% cost reductions over silicon-based competitors,
extremely relevant in such a competitive space. That future is quite bright indeed.
Practical silicon carbide manufacturing is less than a few decades old.
We are still exploring the limits of where this technology can go.
I am excited to see what future applications might crop up in the future.