Hello everyone and Welcome to HowFixit.
In this video I gonna show you how to replace a fan in an HUAWEI MateBook laptop
To disassemble HUAWEI MateBook you will need next tools:
Phillips 1 screwdriver Torx T6 screwdriver
Opener Tweezers
Thermal grease Antistatic brush
Plastic tool Also I recommend using a magnetic mat in repair
process and laying out each screw step-by-step during disassembly, which is especially useful
in the case of the HUAWEI MateBook.
This laptop has a lot of screws of different sizes and it is very important not to confuse
them during assembly.
In the description, I’ll leave links where to buy all the necessary tools.
Turn the laptop over and remove all the screws on the bottom cover.
Next, take the opener and begin to open the case of laptop.
Disconnect the battery cable from
the motherboard.
Pay attention to the order of removing the screws; I recommend unscrewing in the indicated
order.
If thermal grease is very dry and doesn't rub well, you can use isopropyl alcohol.
If the fan is very noisy or does not work at all - you need to replace the fan.
You can find a compatible fan for the replacement part number 0FKHA0000H.
And also in the description under the video I left a link where you can buy new fan for
HUAWEI MateBook laptop.
Please note: how I
tighten the screws on the radiator.
It is necessary to tighten the screws evenly on each side, a few turns of each screw.
If you tighten the screw immediately and completely, there is a chance that you may damage the
processor chip.
Well, that's all, you were on HowFixit and see you guys next time!